My new supercup exhaust!! :) *updated w vid!*
#1
Pro
Thread Starter
Join Date: Apr 2009
Location: Seattle WA (Sammamish)
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
My new supercup exhaust!! :) *updated w vid!*
Hey, woo hoo! My new fabspeed supercup exhaust finally came!
just finished installing it... ran into 2 issues.. first it didn't come with tips like I expected.. I was expecting the 993 style tips to be on it... I will email them in the am... but until then I cant get the pass side tip to tighten up... clamp is all the way closed... loose as a goose... redid it 4 times.. same each time... any tips? no pun intended?
just finished installing it... ran into 2 issues.. first it didn't come with tips like I expected.. I was expecting the 993 style tips to be on it... I will email them in the am... but until then I cant get the pass side tip to tighten up... clamp is all the way closed... loose as a goose... redid it 4 times.. same each time... any tips? no pun intended?
Last edited by bkjwhipple; 08-02-2010 at 12:18 AM.
#2
Rennlist Member
My TA sport exhaust flanged end-pipe would not connect to the OEM tips-pipe without a special ring that goes in between the 2 pipes used as a connector-type to seal and also to act like an adjustment tool for the tips. Without this ring in between, the clamp would not hold tight, connecting the 2 pipes. One end of the pipe, TA exhaust side had a flange design which is different than the OEM Porsche exhaust end-pipe design. I had to order those rings directly from TA authorized dealer in LA. You may need to contact FS and ask them about your issue... Good-luck.
#7
Three Wheelin'
Hey are these the ones they said they were going to fab up for $595 over on 6speed a couple of months ago?
This link? http://www.6speedonline.com/forums/a...-released.html
Did you retain stock cats or is this cat delete?
This link? http://www.6speedonline.com/forums/a...-released.html
Did you retain stock cats or is this cat delete?
Trending Topics
#10
Pro
Thread Starter
Join Date: Apr 2009
Location: Seattle WA (Sammamish)
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
I got the from Fabspeed directly... they are loud.. but not as loud as I expected...stock cats for now... I cant drive the car right now because my driveway is in the middle of being repaved... argh!
I believe these are diff than the ones posted on the 6 speed forum...
and the 124.... I love it but alas... it needs more love than I can give it at the moment...
I believe these are diff than the ones posted on the 6 speed forum...
and the 124.... I love it but alas... it needs more love than I can give it at the moment...
#12
Pro
Thread Starter
Join Date: Apr 2009
Location: Seattle WA (Sammamish)
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
part number is non existent.. invoice says part # 000 996 supercup exhaust price $850 I believe this is the 2nd or 3rd set they have made.. they are looking into the tip issue...hope to hear from them tomorrow as I just got a reply a bit ago.
Last edited by bkjwhipple; 07-22-2010 at 09:26 PM. Reason: bad spulling
#13
Three Wheelin'
Thanks for the update, I'm curious. I thought I heard a rattle in one of my mufflers the other day, so if it doesn't pass the rubber mallet test this weekend I may drive down to Fabspeed and see what they've got.