Freddworks - 996 C2 OEM+ build
The following 2 users liked this post by damage98MO:
cqhall (05-03-2024),
freddworks (10-11-2023)
#47
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'm not sure but I'll ask him! Correct the 996s are Arctic silver
Yesterday I got my Rennline Carbon mirror covers, had to fit them immediately
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
![](https://i.imgur.com/4JUG1gi.jpg)
And today I left her to get a new windshield and seals due to a big stone chip and crack!
Looks so good outside and with the new "mirrors"
![](https://i.imgur.com/v37kn2L.jpg)
#48
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Picked her up from the local Porsche dealer with a brad new windscreen and seals, I knew my old one was bad but damn that made a huge difference.
Kinda missing the banner but really like the clean look without it
And a picture from today when I drove her home
![](https://i.imgur.com/7UeTdoR.jpg)
Oh, and I finally decided on a steering wheel!
Should hopefully arrive soon, will pair it with a works bell short hub
Kinda missing the banner but really like the clean look without it
And a picture from today when I drove her home
![](https://i.imgur.com/7UeTdoR.jpg)
Oh, and I finally decided on a steering wheel!
Should hopefully arrive soon, will pair it with a works bell short hub
![](https://i.imgur.com/9VNDfPJ.jpg)
Last edited by freddworks; 10-14-2023 at 02:16 PM.
#49
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Winter season is upon us here in Sweden, last wash and drive for 2023. First season with the 911 and I love it!
It's defiantly a different feeling compared to my old S2k but yet familiar. Both have that analog drivers car feeling![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Foam party in October?
![](https://i.imgur.com/QTTfIYg.jpg)
Out in the sun:
![](https://i.imgur.com/3cb6s2A.jpg)
![](https://i.imgur.com/vAnN5UA.jpg)
Wheels cleaned:
![](https://i.imgur.com/44uwWnm.jpg)
![](https://i.imgur.com/vyu0o3V.jpg)
And parked up for the winter:
![](https://i.imgur.com/Kh46f5D.jpg)
It's defiantly a different feeling compared to my old S2k but yet familiar. Both have that analog drivers car feeling
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Foam party in October?
![](https://i.imgur.com/QTTfIYg.jpg)
Out in the sun:
![](https://i.imgur.com/3cb6s2A.jpg)
![](https://i.imgur.com/vAnN5UA.jpg)
Wheels cleaned:
![](https://i.imgur.com/44uwWnm.jpg)
![](https://i.imgur.com/vyu0o3V.jpg)
And parked up for the winter:
![](https://i.imgur.com/Kh46f5D.jpg)
The following 2 users liked this post by freddworks:
TheChunkNorris (10-27-2023),
yaz996 (10-15-2023)
#50
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Very nice. I usually can make it to mid dec before they brine the roads here.
One day ill get to your country to explore the sites.
One day ill get to your country to explore the sites.
The following users liked this post:
freddworks (10-21-2023)
#51
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
My local Porsche dealer had a shift boot with the trim ring that they had laying around and they asked if I was interested, snagged it up for pennies
I'm waiting on a new Alcantara shift boot from redline die to a warranty and fitment issue on the old one.
But the trim ring really adds to the interior!
![](https://i.imgur.com/PixRmTT.jpg)
![](https://i.imgur.com/4Pi34UB.jpg)
#52
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
So had some time over and decided to start the rear bumper conversion
Thanks for all the info from here, I had the mark 2 heat shields and tailpipes, license plate lights and harness, so everything went back together without any issues
Swapped the heat shields:
![](https://i.imgur.com/SAelZz6.jpg)
Bumper on:
![](https://i.imgur.com/ZuN98bU.jpg)
And I got an oem shift **** with the shift boot so I decided to try that, love it. That's staying in the car!![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Thanks for all the info from here, I had the mark 2 heat shields and tailpipes, license plate lights and harness, so everything went back together without any issues
Swapped the heat shields:
![](https://i.imgur.com/SAelZz6.jpg)
Bumper on:
![](https://i.imgur.com/ZuN98bU.jpg)
And I got an oem shift **** with the shift boot so I decided to try that, love it. That's staying in the car!
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
![](https://i.imgur.com/MoN8VXX.jpg)
The following users liked this post:
vale46 (10-26-2023)
#53
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Found this great tip here on Rennlist to swap over the GT3 seat belt adjuster, since mine had a annoying vibrating sound I decided to the mod.
Part number: 9968035410001C
The swap is super easy and takes about 5 minutes
Old big bulky over engineered one:
![](https://i.imgur.com/yeJrH9P.jpg)
The old over engineered in pieces:
![](https://i.imgur.com/QAlu79n.jpg)
New GT3 slim one:
Part number: 9968035410001C
The swap is super easy and takes about 5 minutes
Old big bulky over engineered one:
![](https://i.imgur.com/yeJrH9P.jpg)
The old over engineered in pieces:
![](https://i.imgur.com/QAlu79n.jpg)
New GT3 slim one:
![](https://i.imgur.com/v8EvHLw.jpg)
Last edited by freddworks; 10-24-2023 at 03:25 PM.
The following 5 users liked this post by freddworks:
40th steve (10-26-2023),
plpete84 (10-25-2023),
TheChunkNorris (10-25-2023),
vale46 (10-26-2023),
yaz996 (10-24-2023)
#54
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Subtle touches make the biggest differences.
The following 3 users liked this post by TheChunkNorris:
The following users liked this post:
freddworks (10-25-2023)
#56
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Totally agree!
No problems! Happy to help ![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Got something awesome in the mail today
Now, thats a nice box
![](https://i.imgur.com/Q3vuryI.jpg)
Pictures does not make this steering wheel justice.
Now I need to fit it and wait until next year to drive it....
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Got something awesome in the mail today
Now, thats a nice box
![](https://i.imgur.com/Q3vuryI.jpg)
Pictures does not make this steering wheel justice.
Now I need to fit it and wait until next year to drive it....
![](https://i.imgur.com/vvdinNO.jpg)
#57
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
That would look great on my gaurds red car. Send it over and ill get some nice photos and return it promptly....i promise
.
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
The following users liked this post:
freddworks (10-26-2023)
#58
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
And if anyone is in the market for one, here's where I bought it
Teile.com / Partnr: PCG34708420
Last edited by freddworks; 10-26-2023 at 04:11 PM.
#59
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Fit the steering wheel today!
Super happy with the looks and initial feel
Fitted:
![](https://i.imgur.com/ezleDKy.jpg)
Now to decide which horn button to run...
OEM:
![](https://i.imgur.com/swnW8og.jpg)
Blacked out:
Super happy with the looks and initial feel
Fitted:
![](https://i.imgur.com/ezleDKy.jpg)
Now to decide which horn button to run...
OEM:
![](https://i.imgur.com/swnW8og.jpg)
Blacked out:
![](https://i.imgur.com/tUjRsjt.jpg)
The following 2 users liked this post by freddworks:
plpete84 (10-31-2023),
TheChunkNorris (11-01-2023)
The following 2 users liked this post by plpete84:
freddworks (10-31-2023),
TheChunkNorris (11-01-2023)