Notices
996 Forum 1999-2005
Sponsored by:

Horn Replacement Suggestions

Thread Tools
 
Search this Thread
 
Old 07-08-2019, 04:02 PM
  #16  
peterp
Drifting
 
peterp's Avatar
 
Join Date: Jun 2005
Location: NJ/NY area
Posts: 2,187
Received 780 Likes on 473 Posts
Default

Originally Posted by Coopduc
I installed one of these, it’s great! Easy too!
https://www.amazon.com/Stebel-116900.../dp/B00CMX20H4
Thanks for the feedback. Did you need to install a relay due to the (presumably) higher current draw of the air horns, or could you wire it directly in place of the existing horn?
Old 07-08-2019, 04:10 PM
  #17  
misterted
Rennlist Member
Thread Starter
 
misterted's Avatar
 
Join Date: Jul 2017
Location: Jersey Shore
Posts: 241
Received 21 Likes on 16 Posts
Default

Originally Posted by peterp
Thanks for the feedback. Did you need to install a relay due to the (presumably) higher current draw of the air horns, or could you wire it directly in place of the existing horn?
+1
Old 07-08-2019, 04:12 PM
  #18  
jllphan
Rennlist Member
 
jllphan's Avatar
 
Join Date: May 2017
Location: Nashville, TN
Posts: 730
Received 117 Likes on 63 Posts
Default

Originally Posted by peterp
Thanks for the feedback. Did you need to install a relay due to the (presumably) higher current draw of the air horns, or could you wire it directly in place of the existing horn?
I would recommend including the relay. It comes with the horn IIRC, so nothing extra to buy.


Originally Posted by Coopduc
I installed one of these, it’s great! Easy too!
https://www.amazon.com/Stebel-116900.../dp/B00CMX20H4
Good deal, as warned it’s all you’ll ever need! Quality tone as well and befitting a pcar imo.
The following users liked this post:
peterp (07-08-2019)
Old 07-08-2019, 04:51 PM
  #19  
Coopduc
Burning Brakes
 
Coopduc's Avatar
 
Join Date: Mar 2017
Location: Asheville NC
Posts: 854
Received 256 Likes on 135 Posts
Default

I only used the existing Porsche relay. The one that came with the horn is redundant. I removed both existing horns ( one didn’t work), and installed in the stock location, slight modification of the included bracket was necessary to clear the bumper cover.
The following users liked this post:
peterp (07-08-2019)
Old 07-08-2019, 04:53 PM
  #20  
NuttyProfessor
Three Wheelin'
 
NuttyProfessor's Avatar
 
Join Date: Aug 2018
Posts: 1,968
Received 218 Likes on 162 Posts
Default

Mine sounds like a rubber ducky squeak. No bass at all. Embarrassing. I stopped using it cause it doesn't alert anyone. I only get weird finger pointing and laughter.



Quick Reply: Horn Replacement Suggestions



All times are GMT -3. The time now is 08:16 PM.