Notices
993 Forum 1995-1998
Sponsored by:
Sponsored by:

Installed Porsche Classic Radio

Thread Tools
 
Search this Thread
 
Old 05-29-2016 | 09:46 PM
  #46  
L39E's Avatar
L39E
Rennlist Member
 
Joined: Oct 2015
Posts: 665
Likes: 319
From: UT / FL
Default

Originally Posted by M. Schneider
Question: Know one is buying the new Porsche radio for its Navigation properties, right? ... Moreover, a purchase is motivated largely about the aesthetics, no?
Aesthetics + Bluetooth audio streaming and telephone capabilities for me. I suppose I might use the nav sometime but Waze over BT is probably fine for me.

Hopefully there is also some improvement in sound quality over the stock head unit. I am replacing the CDR-210 in the HiFi system in my 4S with the cliassic radio but I am also replacing all the speakers, some of which were blown, so it should sound a lot better. I am putting in the JL Audio C5-525 woofers and tweeters and VW/DynAudio midrange drivers (Thanks, Mike!) in the front doors and Polk MM461P's in the rear shelf. I'm not planning to use the JL crossovers, just replace the stock speakers - hopefully this will sound good . If not I may add a Mosconi DSP amp under the passenger seat. Will report back!
Old 06-03-2016 | 05:35 PM
  #47  
Rennlist Editor's Avatar
Rennlist Editor
Editor
 
Joined: Nov 2011
Posts: 1,132
Likes: 2
Default Front page coverage

Thanks for posting. Thought the front page would be interested too...
https://rennlist.com/articles/porsch...t-mix-old-new/
Old 06-04-2016 | 07:39 PM
  #48  
dcamco's Avatar
dcamco
Advanced
 
Joined: Jan 2016
Posts: 59
Likes: 0
Default

Does anyone know why this unit does not claim to fit in a 996? It appears to be a standard single DIN unless I'm missing something...

This sure would look a lot nicer than the Pioneer I'm using now.
Old 06-05-2016 | 05:05 PM
  #49  
Railmaster.'s Avatar
Railmaster.
Three Wheelin'
 
Joined: Feb 2015
Posts: 1,480
Likes: 109
Default

Originally Posted by coguy
My "no drill" solution. Velcro and black plastic nylon cable clamps to existing holes...
Is that a 964?
Old 06-05-2016 | 08:27 PM
  #50  
FormulaRX's Avatar
FormulaRX
Pro
 
Joined: Aug 2005
Posts: 562
Likes: 10
From: Upland, CA
Default

Originally Posted by Railmaster.
Is that a 964?
Looks like a 964 C4 to me
Old 06-06-2016 | 02:56 PM
  #51  
coguy's Avatar
coguy
Rennlist Member
 
Joined: Jun 2015
Posts: 64
Likes: 1
From: Colorado
Default

Originally Posted by FormulaRX
Looks like a 964 C4 to me
Yes, 964 C4.
Old 06-15-2016 | 02:25 PM
  #52  
E30M3's Avatar
E30M3
Rennlist Member
 
Joined: Oct 2015
Posts: 531
Likes: 10
From: NYC
Default

Question for you all-Does both the USB and IPOD slots charge a phone when plugged into either?

Thanks.
Old 06-15-2016 | 06:35 PM
  #53  
Big Al HURT123's Avatar
Big Al HURT123
Rennlist Member
 
Joined: Feb 2012
Posts: 858
Likes: 4
Default

Will replacing the head unit with this or any other head unit improve the sound at all? I have replaced all the speakers and the factory amp under the passenger seat. While its much netter its still far from great.

Thanks.
Old 06-15-2016 | 10:07 PM
  #54  
makemann's Avatar
makemann
Thread Starter
Racer
 
Joined: Dec 2013
Posts: 264
Likes: 2
From: Northville, MI
Default

Originally Posted by E30M3
Question for you all-Does both the USB and IPOD slots charge a phone when plugged into either?

Thanks.
I'm traveling and away from my car, but I can confirm that it definitely charges from the iPod slot, but unsure if it charges via USB. I can confirm this weekend when I return. My guess is not from USB.
Old 06-16-2016 | 12:23 AM
  #55  
M. Schneider's Avatar
M. Schneider
Addict
Lifetime Rennlist
Member
 
Joined: Jan 1997
Posts: 2,525
Likes: 74
From: ^^ Werk 1 pictured Yr '00 .. Vail, Colorado
Default Signal processing; Filters . . .

A critical step when enhancing audio playback within an automotive interior environment is signal processing or filtering.

The enhancement of my 993's factory HiFi speaker system/location sings,,, Speech Intelligibility and music fidelity are both greatly enhanced, regardless of volume level. Playback is truly Hi - Fi-del-i-ty exhibiting a vehicle wide, stable, dashboard high stereo image ... Your jaw will drop. Any of the widely available add-on DSP modules suited to 12V automotive applications does the trick. Disregard notions of herculean power levels (watts) or Tiffany priced loud speakers. . . . DSP filtering should be your first stop,, certainly for an automotive interior application. The 911's reflective torrent, acoustically speaking, (from the 360* glass) is unconscionable. The 1st stop in any 993 HiFi enhancement I encourage you - is DSP filtering; Signal Processing. (DSP)


Originally Posted by Big Al HURT123
Will replacing the head unit with this or any other head unit improve the sound at all? I have replaced all the speakers and the factory amp under the passenger seat. While its much netter its still far from great.

Thanks.
Old 06-16-2016 | 12:39 AM
  #56  
timothymoffat's Avatar
timothymoffat
Rennlist Member
 
Joined: Apr 2006
Posts: 7,622
Likes: 1,091
From: Rainforest (Vancouver, BC)
Default

You know you're a geek when this seems reasonable. And I'm definitely a geek because I REALLY want one of these.

Looks "correct" but with modern features that make it fit well in today's world. As always, the car itself is relatively reasonable to run, at least relative to other 20 year old sports cars. It's the upgrades and mods that add the big $$$.
Old 06-16-2016 | 12:16 PM
  #57  
Onami's Avatar
Onami
Rennlist Member
 
Joined: Jan 2005
Posts: 5,352
Likes: 1,059
Default

Does the new unit use the existing power connections as is from the original radio - meaning no wire cutting? Looks great!
Old 06-16-2016 | 12:29 PM
  #58  
will007's Avatar
will007
Rennlist Member
 
Joined: May 2016
Posts: 173
Likes: 68
From: San Anselmo, CA
Default

Yes it does. That's the nice thing about this unit, no extra adaptors to fuss with if you have the original stock HU connectors from the factory.
Old 06-16-2016 | 01:10 PM
  #59  
Onami's Avatar
Onami
Rennlist Member
 
Joined: Jan 2005
Posts: 5,352
Likes: 1,059
Default

Thanks Will007!
Old 06-16-2016 | 04:39 PM
  #60  
M. Schneider's Avatar
M. Schneider
Addict
Lifetime Rennlist
Member
 
Joined: Jan 1997
Posts: 2,525
Likes: 74
From: ^^ Werk 1 pictured Yr '00 .. Vail, Colorado
Default MY98 thru MY01 ... 996 fitted w/CDR-220 radio/CD

The initial production of series 986 Boxster and 996 Carrera cars were fitted with 1-DIN radios. The early years MY97 thru MY01 utilized the common CDR220 radios, which had both the Euro typical ISO and RCA pre-out connections... I/O's.
Somewhere along the Carrera production years the MOST CAN-bus was introduced, and a specific radio w/CAN-Bus I/O became the standard moving forward...

So, year dependent, use of the newer 2016 Porsche Classic Radio w/ISO connection in a 996 911 Carrera is cause for further investigation ..... $.02



Originally Posted by dcamco
Does anyone know why this unit does not claim to fit in a 996? It appears to be a standard single DIN unless I'm missing something...

This sure would look a lot nicer than the Pioneer I'm using now.


Quick Reply: Installed Porsche Classic Radio



All times are GMT -3. The time now is 11:47 AM.