FS 993 OEM Cup Suspension
#1
Rennlist Member
Thread Starter
Join Date: Jan 2014
Location: Victorville, CA/Everett, WA
Posts: 391
Likes: 0
Received 4 Likes
on
3 Posts
FS 993 OEM Cup Suspension
Hi guys i have some OEM 993 Cup Coilover suspension with camberplates.
Im looking for $1300 for the set.
not sure of the exact specs but some the 993 gurus like Bill and Steve know what these are.
Im looking for $1300 for the set.
not sure of the exact specs but some the 993 gurus like Bill and Steve know what these are.
Last edited by quacktoduck; 08-18-2015 at 11:33 PM.
#3
Confused, do you have 2 sets? Top photo looks like regular RS parts inc top mounts. The bottom set has smaller OD springs & machined top mounts. Can you post some photos of the top caps? what's the history of these?
edit, are there any markings on the springs? something like 140/60/200?
edit, are there any markings on the springs? something like 140/60/200?
Last edited by ToSi; 08-18-2015 at 09:46 PM.
#4
Rennlist Member
Thread Starter
Join Date: Jan 2014
Location: Victorville, CA/Everett, WA
Posts: 391
Likes: 0
Received 4 Likes
on
3 Posts
Some Background was i picked them up from a 993 cup car that was going full race chassis with resi type shocks.
not sure of the mileage as the owner never got around to tell me but they did need a rebuild as the seal was leaking when i bought it.
The suspension will need a tear down from bilstein in socal.
As for the Top mounts top two are pics i grabbed from google.
the bottom is the actual suspension pics i have.
the fronts have camber plates with adjustable camber that came OEM with the coilovers the rears are monoball.
I actually like the design that Bilstein had over the JRZ as JRZ camber plates there is some cutting involved in order to get full camber movement.
not sure of the mileage as the owner never got around to tell me but they did need a rebuild as the seal was leaking when i bought it.
The suspension will need a tear down from bilstein in socal.
As for the Top mounts top two are pics i grabbed from google.
the bottom is the actual suspension pics i have.
the fronts have camber plates with adjustable camber that came OEM with the coilovers the rears are monoball.
I actually like the design that Bilstein had over the JRZ as JRZ camber plates there is some cutting involved in order to get full camber movement.
#6
Rennlist Member
Thread Starter
Join Date: Jan 2014
Location: Victorville, CA/Everett, WA
Posts: 391
Likes: 0
Received 4 Likes
on
3 Posts
thanks Im not making money just selling them for what i had in them since i didnt end up running them just passing some great OEM suspension and clearing out the garage.