993 Door Pocket Attachment Reinforcement
#167
Rennlist Member
Thread Starter
#168
Rennlist Member
Thread Starter
HiFi Door Pocket Reinforcements
4 of the 10 sets have been spoken for. I have 6 sets of HiFi door pocket reinforcements still available.
If you are interested in a set of HiFi door pocket reinforcements:
$10 per set, and that includes shipping to the US via USPS.
I will PM you a link for paying with PayPal after I ship the items out (Looks like Thursday morning at this point).
Current list of members for this batch of HiFi door pocket reinforcements:
Standard Door Pocket Reinforcements
Still preliminary. I met with a local 993 owner last night. We repaired both of his cracked standard door pockets as shown below with 50 mm x 70 mm x 3/16" reinforcements.
This flat piece solution will leave a 2 mm gap where the pocket meets the door card. Most of this gap will be obscured by the door pocket cover when it is opened. We left the glued parts to cure over night. I hope to get a picture of the finished product when he gets the pockets reinstalled.
Let me know what you think. Will this work for you?
Same as above. If you are interested, post here, then follow up with name and address in a PM.
Current list of members interested in standard door pocket reinforcements:
50 mm x 70 mm x 3/16" reinforcement before gluing. The owner had the broken piece (red circled item on right) to fill the missing chunk above the screw. This flat piece solution will leave a 2 mm gap where the pocket meets the door card. Most of this gap will be obscured by the door pocket cover when it is opened and obviously cannot be seen when the door pocket is closed.
Closeup of the 2 mm gap.
4 of the 10 sets have been spoken for. I have 6 sets of HiFi door pocket reinforcements still available.
If you are interested in a set of HiFi door pocket reinforcements:
- Post to this thread first
- Follow up with a PM that has your name and mailing address (use a browser, not one of the mobile apps)
$10 per set, and that includes shipping to the US via USPS.
I will PM you a link for paying with PayPal after I ship the items out (Looks like Thursday morning at this point).
Current list of members for this batch of HiFi door pocket reinforcements:
- jbravenec
- gt3'er
- jhalsey
- CarreraX
- _available
- _available
- _available
- _available
- _available
- _available
Standard Door Pocket Reinforcements
Still preliminary. I met with a local 993 owner last night. We repaired both of his cracked standard door pockets as shown below with 50 mm x 70 mm x 3/16" reinforcements.
This flat piece solution will leave a 2 mm gap where the pocket meets the door card. Most of this gap will be obscured by the door pocket cover when it is opened. We left the glued parts to cure over night. I hope to get a picture of the finished product when he gets the pockets reinstalled.
Let me know what you think. Will this work for you?
Same as above. If you are interested, post here, then follow up with name and address in a PM.
Current list of members interested in standard door pocket reinforcements:
- rbeggs (need shipping details)
- tkm
- puako
- callipygian 11
- EHS
50 mm x 70 mm x 3/16" reinforcement before gluing. The owner had the broken piece (red circled item on right) to fill the missing chunk above the screw. This flat piece solution will leave a 2 mm gap where the pocket meets the door card. Most of this gap will be obscured by the door pocket cover when it is opened and obviously cannot be seen when the door pocket is closed.
Closeup of the 2 mm gap.
Last edited by BesideTheBox; 05-22-2016 at 10:31 AM. Reason: Update
#171
Rennlist Member
Thread Starter
Standard door pocket reinforcement install
Here are a couple of pictures of the 993 that the owner and I installed the flat ABS reinforcements on last week.
He used a sharp utility knife to cut off the dried excess glue that gets squeezed out. I think the top edge could look better if someone spent a little time in that area with a flat file and some fine sandpaper, or perhaps even a buffing wheel.
The 2mm gap is near the hinge of the door pocket lid. This is not much of an issue in my opinion. Your call though. I can supply some thin ABS sheet that can, with cutting, shaping, and gluing, fill that gap. The gap is a little over 2mm (2mm is ~.08"), but I can only get ABS sheet in .06" (not quite thick enough, but ABS glue may fill any gap) and .12" (too thick, so would require some shaping).
Flat sheet ABS door pocket reinforcement solution.
Flat sheet ABS door pocket reinforcement solution.
Standard Door Pocket Reinforcements
If you are interested in a set of standard door pocket reinforcements:
$10 per set, and that includes shipping to the US via USPS.
I will PM you a link for paying with PayPal after I ship the items out.
Current list of members for this batch of standard door pocket reinforcements:
He used a sharp utility knife to cut off the dried excess glue that gets squeezed out. I think the top edge could look better if someone spent a little time in that area with a flat file and some fine sandpaper, or perhaps even a buffing wheel.
The 2mm gap is near the hinge of the door pocket lid. This is not much of an issue in my opinion. Your call though. I can supply some thin ABS sheet that can, with cutting, shaping, and gluing, fill that gap. The gap is a little over 2mm (2mm is ~.08"), but I can only get ABS sheet in .06" (not quite thick enough, but ABS glue may fill any gap) and .12" (too thick, so would require some shaping).
Flat sheet ABS door pocket reinforcement solution.
Flat sheet ABS door pocket reinforcement solution.
Standard Door Pocket Reinforcements
If you are interested in a set of standard door pocket reinforcements:
- Post to this thread first
- Follow up with a PM that has your name and mailing address (use a browser, not one of the mobile apps)
$10 per set, and that includes shipping to the US via USPS.
I will PM you a link for paying with PayPal after I ship the items out.
Current list of members for this batch of standard door pocket reinforcements:
- rbeggs (need shipping details)
- tkm
- puako
- callipygian 11
- EHS
#172
Rennlist Member
Thread Starter
#176
Rennlist Member
Thread Starter
HiFi Door Pocket Reinforcements
I have 6 sets of HiFi door pocket reinforcements available. If you are interested in a set of HiFi door pocket reinforcements:
Due to the "bravenec/halsey" effect, no items get shipped until PayPal payment received.
When you complete the 2 steps above, I will PM you a link for paying with PayPal.
If I receive your payment by Thursday June 2nd at 5PM CST your item will ship on Friday, June 3rd.
Current list of members for this batch of HiFi door pocket reinforcements:
Standard Door Pocket Reinforcements
I will have 10 sets of standard door pocket reinforcements available.
The kit will come with two 50mm x 70mm reinforcement pieces and 4 filler pieces (two .060" and two .120") in case you feel that you need to fill in the 2mm gap near the hinge of the door pocket lid (see post #168). If you choose to fill the gap, the filler pieces will need to be cut and shaped, and I recommend that you fill only the top 1/4" or 1/2" of it. Fill the gap first so that it is in the same plane as the rest of the area that the reinforcement mates with. Let that cure, shape it, and then glue the reinforcement piece. Use fresh/new medium black ABS cement (see post #57) as it loses its effectiveness over time.
If you are interested in a set of standard door pocket reinforcements:
Due to the "bravenec/halsey" effect, no items get shipped until PayPal payment received.
When you complete the 2 steps above, I will PM you a link for paying with PayPal.
If I receive your payment by Thursday June 2nd at 5PM CST your item will ship on Friday, June 3rd.
Current list of members for this batch of standard door pocket reinforcements:
I have 6 sets of HiFi door pocket reinforcements available. If you are interested in a set of HiFi door pocket reinforcements:
- Post to this thread first (and indicate HiFi door pocket)
- Follow up with a PM that has your name and mailing address (use a browser, not one of the mobile apps)
Due to the "bravenec/halsey" effect, no items get shipped until PayPal payment received.
When you complete the 2 steps above, I will PM you a link for paying with PayPal.
If I receive your payment by Thursday June 2nd at 5PM CST your item will ship on Friday, June 3rd.
Current list of members for this batch of HiFi door pocket reinforcements:
- jskylarwilson (need PM with shipping address)
- Edward
- keninirvine
- _available
- _available
- _available
Standard Door Pocket Reinforcements
I will have 10 sets of standard door pocket reinforcements available.
The kit will come with two 50mm x 70mm reinforcement pieces and 4 filler pieces (two .060" and two .120") in case you feel that you need to fill in the 2mm gap near the hinge of the door pocket lid (see post #168). If you choose to fill the gap, the filler pieces will need to be cut and shaped, and I recommend that you fill only the top 1/4" or 1/2" of it. Fill the gap first so that it is in the same plane as the rest of the area that the reinforcement mates with. Let that cure, shape it, and then glue the reinforcement piece. Use fresh/new medium black ABS cement (see post #57) as it loses its effectiveness over time.
If you are interested in a set of standard door pocket reinforcements:
- Post to this thread first (and indicate standard door pocket)
- Follow up with a PM that has your name and mailing address (use a browser, not one of the mobile apps)
Due to the "bravenec/halsey" effect, no items get shipped until PayPal payment received.
When you complete the 2 steps above, I will PM you a link for paying with PayPal.
If I receive your payment by Thursday June 2nd at 5PM CST your item will ship on Friday, June 3rd.
Current list of members for this batch of standard door pocket reinforcements:
- rbeggs (need shipping details)
- tkm
- puako
- callipygian 11
- EHS
- Daxmanian (Belgium!)
- _available
- _available
- _available
- _available
Last edited by BesideTheBox; 05-30-2016 at 12:23 AM. Reason: Updates
#179
Rennlist Member
Thread Starter