ruf wheel refinishing
#16
Does anyone have the paint codes for the hyper silver or know where I could buy it? Is there a special clear and base coat I need to buy? I was thinking I would buy an airbrush and try out just refinishing the little bits of curb rash. If it doesn't work out, then get the wheels professionally done. It would be nice to have a solution so I don’t have to get the wheels professionally refinished each time I bump them.
Knight, I still don't have a car, but I am close to getting one.
Knight, I still don't have a car, but I am close to getting one.
#17
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
If you come up with an airbrushing solution, I am sure many of use would like to see it - these wheels curb REALLY EASY - for those who do not have them on the car, I will say that again, REALLY EASY.
Sigh,
Cheers,
Mike
Sigh,
Cheers,
Mike
#18
Rennlist Member
I took a pretty decent hit to one of my 19" wheels. I cannot find a replacement so I will be forced to refinish all four wheels (matching is nearly impossible). Any advice on getting a hold of the closest replacement hyper silver finish would be greatly appreciated (the car is currently in southern California). Thanks in advance.
~Dave
~Dave
#19
Rennlist Member
I took a pretty decent hit to one of my 19" wheels. I cannot find a replacement so I will be forced to refinish all four wheels (matching is nearly impossible). Any advice on getting a hold of the closest replacement hyper silver finish would be greatly appreciated (the car is currently in southern California). Thanks in advance.
~Dave
~Dave
Maybe you can get a replacment, though it may not be cheaper than refinishing all 4...
Last edited by SpeedyC2; 07-14-2017 at 02:16 PM. Reason: typo
#20
Rennlist Member
RUF is producing wheels again: https://rufautomobiles.com/product-c...wheels-brakes/
Maybe you can get a replacment, though it may not be cheaper than refinishing all 4...
Maybe you can get a replacment, though it may not be cheaper than refinishing all 4...
~Dave
#21
Does anyone have the paint codes for the hyper silver or know where I could buy it? Is there a special clear and base coat I need to buy? I was thinking I would buy an airbrush and try out just refinishing the little bits of curb rash. If it doesn't work out, then get the wheels professionally done. It would be nice to have a solution so I don’t have to get the wheels professionally refinished each time I bump them.
Knight, I still don't have a car, but I am close to getting one.
Knight, I still don't have a car, but I am close to getting one.
Attached are a couple of examples of Hyper coating that we shot here at Wheel Dynamics .
#22
Rennlist Member
Thank you...it is greatly appreciated. They are rear 11 x 19.
~Dave
Last edited by 11Quarts; 07-14-2017 at 09:52 PM.
#24
Rennlist Member
#26
Advanced
Join Date: Jun 2006
Location: Vancouver, B.C. Canada
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
The new wheels are of a slightly different design, and are now forged construction.
They are just now coming onto the market, and will be in high demand for a while.
They are just now coming onto the market, and will be in high demand for a while.