Speedline RS Wheels, genuine or replica ?
#1
#3
#5
Rennlist Member
Thats because the set Nuerberger was/is selling are aluminum and the set on ebay are magnesium...
apparently they have been drilled since originally the five lug holes would be closed ,this often was done
to allow them to be run both ways,centreloc and five lug.
The center mass is considerably deeper as well,ask me how I know....Bert
apparently they have been drilled since originally the five lug holes would be closed ,this often was done
to allow them to be run both ways,centreloc and five lug.
The center mass is considerably deeper as well,ask me how I know....Bert
#6
Thats because the set Nuerberger was/is selling are aluminum and the set on ebay are magnesium...
apparently they have been drilled since originally the five lug holes would be closed ,this often was done
to allow them to be run both ways,centreloc and five lug.
The center mass is considerably deeper as well,ask me how I know....Bert
apparently they have been drilled since originally the five lug holes would be closed ,this often was done
to allow them to be run both ways,centreloc and five lug.
The center mass is considerably deeper as well,ask me how I know....Bert
Trending Topics
#9
Rennlist Member
#10
Banned
Join Date: Jun 2008
Location: Potsdam, Germany
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
These are drilled magnesium wheels. I don’t know how he comes to the idea that they are 8x18 ET52 and 10x18 ET65. The Supercup Central locking are 8,5 X18 ET53 10x18 ET60
Richard
Richard
#12
Look like Tramont Cup's to me, which don't have the scooped out rear side of the spokes.
Compare: left is a Tramont 10x18 ET59, right is a pic from the ad.
Good wheels and a dead ringer for Speedlines.
Compare: left is a Tramont 10x18 ET59, right is a pic from the ad.
Good wheels and a dead ringer for Speedlines.
Last edited by alps; 01-23-2012 at 04:00 PM.
#13
Cup Mg center Speedlines are
centerlocks(which could be drilled out for 5 lug use)
8.5 ET 52
10 ET61
#14
Rennlist Member
Those look to be magnesium center lock 993 RS centers that as Bert says have been drilled to 5 x 130 pattern. Bert and I know all about this since I have refinished two sets for him. jdorociak@gmail.com jim
#15
Banned
Join Date: Jun 2008
Location: Potsdam, Germany
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
10x18 ET60 993 362 140 80
The 8x18 ET52 10x18 ET61 hat the 964 Turbo Speedline. I have a set central lock (not complete) two inners rings are missing from the rears. And on the outer rings they are markes as I said 8.5 ET53 and 10 ET60 and it is also listed im my books with these ET.
Richard