Hi Jim,

I am looking to buy a set of your custom Speedline 18" replicas for my 1990 C4 WB conversion (ala RSR) For the conversion I'm planning on keeping the NB trailing arms, using Danske steel flares and as many OEM parts as possible. My email is fishyfishfish@mac.com and my cell is 323.708.6437. I'm located in Ojai, CA. Look forward to hearing from you.

Best,

Chris

Jim Im a reenlister with a 993 Targa. I have the Speedline wheels. Are you still refinishing these wheels? Does the 2 piece design actually hold air pressure? I have always had a very slow leak even with new tires on one wheel. Im in San Diego but I hear you are the expert. How much does it cost ?

Hi Jim,

I was doing a search and came across your posts about Speedlines. I wanted to take my Speedline center caps off my wheels and replace them with caps with the Porsche crest. Which factory or aftermarket caps fit the 18" Alessios'? I'm going to take the Speedlines off and rotate them with a set of 17" Ruf wheels so it would be a good time to change them out. I called the usual places and they had no clue about fitment. Thanks in advance.

AL

thanks!!! I appreciate. I'll have to decide what I want to do. If they don't fit my car I'll just return them to him and save up to buy a set from you.

thanks

rd

They do appear to be in good condition assuming you like black. I did an all black set of Daytona wheels last year for a 964 narrow body car with fender flares added and they came out stunning.
Used wheel sets are really hard to value as there are surprises once purchased, so I tend to always buy as low as possible. Most used but not destroyed sets I figure are $1500 - 2500. What has happened before is guys have bought sets and then found out they needed to be resized to actually fit and need a complete restoration and when you add in that cost it is usually better to buy a set from me custom sized for your car. I do have Daytona centers and other parts necessary to build sets of wheels. My Daytona sets have a price range of $4100 - 4300 depending on exactly what I am building the set to fit. Jim jdorociak@gmail.com

thanks for the quick reply. they really do seem to be in good shape and I know the owner. he said I could put them on my car and if I didnt like them I could return them. what do you think a set of these is worth?

rd

? was wondering if you could help me out. I am thinking of purchasing these wheels and tires from my 996 turbo s. owner says they are techart speedline daytonas and I just wanna make sure. I thought I would ask you since you seem to be the man!!!) any help would be greatly appreciated. thanks


also do you restore them??? just wondering how much you might charge. these are in great shape. just a couple small scratches no apparent rash. just looks like they got dinged while moving. I included a link to my dropbox thanks

rd

https://www.dropbox.com/sh/clv1a1uka...HogXJIvUa?dl=0

Hi Jim,
I am looking for a set of Speedlines for a 996 narrow body 50/65 et. Any help would be appreciated.
Tom

Hi Jim,
I am in the process of refinishing my 993 targa speedline wheels. I need to replace quite a number of rim bolts and nuts. I came across a few message postings indicating that you may know some sources/solutions for replacing the corrossion prone rim bolts and nuts (29 pair per wheels). Would you please let me know if there's any good suppliers for these items?
thanks
ct

cptan@yahoo.com

Bjorn Kaul -- send me a picture at my regular email address. I had some the looked like Pole Positions - they were white fiberglass with new red leather. jdorociak@gmail.com jim