Turbo bumper install
#1
Three Wheelin'
Thread Starter
Turbo bumper install
All:
My stock bumper was trashed & ugly, so I bought a used Turbo bumper. Sanded it down & filled the nicks/scratches, got it painted & finally got around to installing it today;
Before:
During:
After:
Way better! If you're on the fence about this, do it! The only tricky part is getting the rubber trim right.
The turbo fogs/ducts aren't ready yet.
Now I have to decide whether or not to put on a front license plate!
Cheers,
Paul.
My stock bumper was trashed & ugly, so I bought a used Turbo bumper. Sanded it down & filled the nicks/scratches, got it painted & finally got around to installing it today;
Before:
During:
After:
Way better! If you're on the fence about this, do it! The only tricky part is getting the rubber trim right.
The turbo fogs/ducts aren't ready yet.
Now I have to decide whether or not to put on a front license plate!
Cheers,
Paul.
#5
Intermediate
Join Date: Feb 2010
Location: Stuttgart, Germany
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Did you get the bumper at Sunset? Where did you get it painted?
Any recommendation for a trustworthy paint shop in Portland?
I'll probably do a Euro-conversion while I'm at it....
Thanks!
Any recommendation for a trustworthy paint shop in Portland?
I'll probably do a Euro-conversion while I'm at it....
Thanks!
#7
Three Wheelin'
Thread Starter
I bought the bumper used, though I am sure Sunset can get you one. If I were to do it over, I'd just suck it up & buy a new one.
I had it painted locally- same outfit that painted my MY'02s Polar Silver. Any decent paint shop should be able to do this, as new bumper covers are pretty common! As for a reputable shop in Portland- I suggest you ask around the area.
Cheers,
Paul.
Trending Topics
#11
Three Wheelin'
Thread Starter
#14
Three Wheelin'
Thread Starter
#15
Racer
Join Date: Nov 2006
Location: Fort Collins, CO
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
+1... get the bumper plugs and put your plate in the trunk... tell the officer that the bracket, to hold the plate on the front bumper, is ordered from Germany and you can't wait for it to arrive and get your new bumper finished! It worked for me!