OT - Ordered Four Post Lift
#1
Drifting
Thread Starter
OT - Ordered Four Post Lift
After much thought I ordered a Bendpak HD9 four post lift along with all the goodies including a pneumatic/hydraulic sliding bridge jack. I will no longer have to run circles around the car with floor jacks, jack stands and hockey pucks. My wife and I will both have winter parking too. I won't likely get it installed for awhile due to some upcoming vacation time. Life sure is backwards as I should have built the big garage and got the lift before I restored 4 cars in a 12 x 22 garage.
#2
Congrats, I've always wanted a lift, but don't have the garage space/height in our current house.
Until then, I'll have to settle for the low-rise/low tech 4-post lifts (just ordered them yesterday):
http://www.asedeals.com/flat-top-jack-stands.html
Some day I'll have the real thing, but I'm excited about the jack-stand upgrade until then.
Until then, I'll have to settle for the low-rise/low tech 4-post lifts (just ordered them yesterday):
http://www.asedeals.com/flat-top-jack-stands.html
Some day I'll have the real thing, but I'm excited about the jack-stand upgrade until then.
#3
Matt, make sure you take plenty of pics through the installation process. We'll stay tuned.
Ken
Ken
#6
Drifting
Thread Starter
I'm in Canada so I bought from the only Canadian dealer - Babco. You might try Metro-Lifts in the US. They advertise on Ebay.
#7
Drifting
Thread Starter
Thanks Mark. I went with 9 foot walls and an 11' ceiling. The first 42" on each side is only at a 9 foot height. This was all I could get away with but it will work.
Trending Topics
#8
Instructor
Join Date: May 2007
Location: Kirkland, WA
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
-Doug
#9
Rennlist Member
#12
Addict
Rennlist Member
Rennlist Member
IIRC is 9'6" is the preferred or minimum... although I guess one consideration would be the type of cars for whcih the four post is being used for (i.e. lower profile cars might allow for lower ceiling height).
#13
Rennlist Member
Maximum height on the bendpak 9 is about 6'. Add 4 inches for the ramps, the height of the "upper" car and don't forget those light fixtures or door rails aboce all of it. Preferred works out to be over 11' depending on the car you put on top.
I like my HD9 a lot. Purchased from ASE in CT and drop shipped from the factory. BTW, the factory has terrific customer service. They answered lots of questions and shipped multiple replacement parts that I'm pretty sure my dud installer lost or broke.
I like my HD9 a lot. Purchased from ASE in CT and drop shipped from the factory. BTW, the factory has terrific customer service. They answered lots of questions and shipped multiple replacement parts that I'm pretty sure my dud installer lost or broke.