Any one w/ a DAS bar and PP or Profi XL
12-06-2008, 08:06 PM
#46
Addict
Rennlist Member
Rennlist Member
Thread Starter
This is all starting to come together
BK-9062 side mounts
BK- 9031 sub strab bar
Recaro sliders
The last bit will be the tunnel belt mounts, I think MB965 used BK 9003 for the tunnel belt mounts
12-06-2008, 08:33 PM
#47
Rennlist Member
Bill:
Drill the pan for the sub-belts. In a frontal impact, the sub-straps can be under a tremendous load (6 kN [1,320 lb] each in a 5-or 6-point racing harness during FIA testing requirements of 50kph / 30 g impact). I'm not sure I'd trust a bar that's just bolted to the sliders. I drilled for the sub belts in both of my 993s. You can make the install very clean (see photos)... not that anyone will see them though under the seat
Drill the pan for the sub-belts. In a frontal impact, the sub-straps can be under a tremendous load (6 kN [1,320 lb] each in a 5-or 6-point racing harness during FIA testing requirements of 50kph / 30 g impact). I'm not sure I'd trust a bar that's just bolted to the sliders. I drilled for the sub belts in both of my 993s. You can make the install very clean (see photos)... not that anyone will see them though under the seat
12-06-2008, 08:55 PM
#48
Burning Brakes
Join Date: Mar 2003
Location: NJ
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
