9m93RS Clubsport GT2 look: Assembly & Running Gear
10-06-2008, 09:38 PM
#31
Addict
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
The car is a full Clubsport, so no carpets other than on the footboards.
The RS Clubsport seats are the same black nomex (cloth) Recaros that were fitted to the 968CS. At the time we started this project we actually bought a 968 Sport which had both the nomex CS and standard seats with it, then simply sold the car with the standard seats refitted. Needs as must.
10-15-2008, 08:32 AM
#41
Addict
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Here's a quick shot under the carbon bonnet. MC is building up the fuse board this morning and has dummy fitted the fuel tank to check all the connections before we take it out again to clean it properly.
10-15-2008, 09:23 AM
#42
Addict
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
I suppose I best give you all another fix, so to keep you all going, here are a few external shots of the car. Note that it is still on its assembly dolly until we get the wheels fitted up with those 245 & 315 x 18 Toyo R888's that you can see in the background. It's a bit overcast and dark today so I shot most of the photos with flash which does tend to blue the colour slightly, hence one of the photos is repeated without the flash so that you can see the colour properly.
Please excuse the dust on the bodywork, the car is being assembled in the bodyshop which is naturally a dusty environment and even though we keep it covered up dust naturally finds it way onto the car however we will have a permanent solution for this problem soon. There is another 800sqft unit in front of the 9m Racing department which is currently only being used to store used parts, once we have got this cleared we intend to refurbish it and use it as a special project assembly area.
Please excuse the dust on the bodywork, the car is being assembled in the bodyshop which is naturally a dusty environment and even though we keep it covered up dust naturally finds it way onto the car however we will have a permanent solution for this problem soon. There is another 800sqft unit in front of the 9m Racing department which is currently only being used to store used parts, once we have got this cleared we intend to refurbish it and use it as a special project assembly area.
