WTB: factory RS heater bypass tube
#1
Rennlist Member
Thread Starter
WTB: factory RS heater bypass tube
Does anyone know if these are still available, and from who? Or, does anyone have one -- or a well-fitting CF one -- that they'd sell me?
#3
Rennlist Member
Thread Starter
I bought one of Thom's tubes, but it looks like, at least for now, the molds are shot. The bottom opening is close to a half inch too wide, and the perimeter isn't circular. It's oval. Thom isn't sure when he's going to have good ones available again, so at this point, rather than reassemble the stock heater parts, I'd like to find (ideally) a factory piece, or a well-fitting CF one.
Trending Topics
#9
Rennlist Member
#10
#12
Addict
Rennlist Member
Rennlist Member
#13
Rennlist Member
Yeah, I know. That rod is big bucks. Maybe Porsche financed Cayenne development with the sales of the RS rod?
+1
Blower isn't needed unless you're driving the car in the winter.
Fabspeed sells block-off plates which are another option vs. the bypass pipe.
+1
Blower isn't needed unless you're driving the car in the winter.
Fabspeed sells block-off plates which are another option vs. the bypass pipe.
#14
Seared
Rennlist Member
Rennlist Member
#15
Any pics of before and after for comparison?
I don't drive my car in winter, but will occasionally take it out for a spin.
What other benefits besides replacing the big and bulkier part.
I don't drive my car in winter, but will occasionally take it out for a spin.
What other benefits besides replacing the big and bulkier part.