Public-domain OBD1 PCB board - ORDER HERE
#288
Three Wheelin'
Join Date: Aug 2006
Location: Bremerton, WA
Posts: 1,438
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have my borad finished but I'm not sure about the polarity on the LED's (and to think I used to be an electronics draftsman.. had to read those things all day long.. how quickly I've forgotten).
Long-leg on the LED goes to... ???
Aside from that.. I'm also sumpted on what to do for the connections. I have both a 964 and 993 here and I'd like to be able to use it on both, so I need some sort of system to use different car connectors. Speaking of car connectors where did you guys source the ODB-I plug used in the early 993's? I can handel the rosetta-stone 964 plug with wires but I want a proper ODB-I plug too.
THX!!
Long-leg on the LED goes to... ???
Aside from that.. I'm also sumpted on what to do for the connections. I have both a 964 and 993 here and I'd like to be able to use it on both, so I need some sort of system to use different car connectors. Speaking of car connectors where did you guys source the ODB-I plug used in the early 993's? I can handel the rosetta-stone 964 plug with wires but I want a proper ODB-I plug too.
THX!!
#292
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
UPDATE! I cleared my airbag light! Whoohooo! I mentioned earlier in this thread that I had one SRS/Airbag fault that would come back immediately after I cleared it. Well, it turns out my driver's airbag was not plugged in.
The funny thing is that I started to write a post asking if anyone knew what my stubborn fault meant. As I was typing, it struck me that the airbag might not be correctly plugged in because I had taken the airbag off several times while trying to fix my horn problem. So, I went out to the car, took off the airbag, and lo-and-behold, it was unplugged. It was then that I remembered that I was taking the airbag on and off several times, trying to get just the right tension on the horn ring, and I finally got it right - and left it that way, without opening it back up one last time to reconnect the airbag. Of course I didn't notice anything different because I had always had the airbag light.
Now, no more airbag light! I couldn't be happier! The only fault I have now is something in the climate control system, which I'm more than sure is my fresh air flap motor, which I know to be bad.
Thanks again to all who make this interface and software available!
The funny thing is that I started to write a post asking if anyone knew what my stubborn fault meant. As I was typing, it struck me that the airbag might not be correctly plugged in because I had taken the airbag off several times while trying to fix my horn problem. So, I went out to the car, took off the airbag, and lo-and-behold, it was unplugged. It was then that I remembered that I was taking the airbag on and off several times, trying to get just the right tension on the horn ring, and I finally got it right - and left it that way, without opening it back up one last time to reconnect the airbag. Of course I didn't notice anything different because I had always had the airbag light.
Now, no more airbag light! I couldn't be happier! The only fault I have now is something in the climate control system, which I'm more than sure is my fresh air flap motor, which I know to be bad.
Thanks again to all who make this interface and software available!
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
#293
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by FotoVeloce
I have my borad finished but I'm not sure about the polarity on the LED's (and to think I used to be an electronics draftsman.. had to read those things all day long.. how quickly I've forgotten).
Long-leg on the LED goes to... ???
<snip>
Long-leg on the LED goes to... ???
<snip>
![](http://www.evergreen.edu/biophysics/technotes/electron/led.gif)
#297
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'm so confused - is someone assembling these boards? I hve indictaed I'd like to order one but haven't been contacted so I have no idea what's goign on. Also, cost? Shipping? I have two left thmubs (but great with financial planning questions) so I don't want to try and assemble one. TIA for any updates.
Peter
Peter
#298
Three Wheelin'
Join Date: Aug 2006
Location: Bremerton, WA
Posts: 1,438
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
If he is still selling them, they are quite easy to source parts and assemble. It was fun actually, I'm still kitting out my little OBD interface with custom cables and stuff.
![evilgrin](https://rennlist.com/forums/graemlins/evilgrin.gif)