Disabling spoiler
01-25-2006, 06:05 PM
#16
Originally Posted by Jastx
That's why I got the RUF spoiler control module for my C4S. It eliminated the rediculous up and down around town but did raise it at around 75mph. A great mod, I thought. They don't offer them new anymore from what I understand, so if you come across one, snap it up.
01-25-2006, 06:37 PM
#17
Rennlist
Lifetime Member
Lifetime Member
So when exactly do you want your spoiler in the lowered position?
I have been thinking about the mod for you and so far I can only think of a manual cut off switch for the speed sending data line to the spoiler control module, so basically you would leave the circuit open with a switch so the SCM never receives the speed data that it has reached 50 mph...
I have been thinking about the mod for you and so far I can only think of a manual cut off switch for the speed sending data line to the spoiler control module, so basically you would leave the circuit open with a switch so the SCM never receives the speed data that it has reached 50 mph...
01-25-2006, 06:53 PM
#18
Originally Posted by Robin 993DX
So when exactly do you want your spoiler in the lowered position?
I have been thinking about the mod for you and so far I can only think of a manual cut off switch for the speed sending data line to the spoiler control module, so basically you would leave the circuit open with a switch so the SCM never receives the speed data that it has reached 50 mph...
I have been thinking about the mod for you and so far I can only think of a manual cut off switch for the speed sending data line to the spoiler control module, so basically you would leave the circuit open with a switch so the SCM never receives the speed data that it has reached 50 mph...
01-25-2006, 06:55 PM
#19
Rennlist
Lifetime Member
Lifetime Member
Well... with the manual speed signal interruption method that I was proposing it is fairly simple. Just hook up two wires to the switch and splice them into one of the SCM's wire....
01-25-2006, 09:25 PM
#21
King of Cool
Rennlist Member
Rennlist Member
FYI,
I have '95 and unplugged the thing showed on the photo (& on Robin's DIY) when I installed RS wing and no warning light, no problems.
I have '95 and unplugged the thing showed on the photo (& on Robin's DIY) when I installed RS wing and no warning light, no problems.
01-26-2006, 01:01 AM
#23
Addict
Rennlist Member
Rennlist Member
If you want it up, all the time, with no warning light, then maybe the following would work...
Raise it up. Pull the plug. Jumper the pins.
Shouldn't that do it?
Raise it up. Pull the plug. Jumper the pins.
Shouldn't that do it?
01-26-2006, 01:05 AM
#24
Phlat Black Guru
Rennlist
Lifetime Member
- Times 2
Rennlist
Lifetime Member
- Times 2
Join Date: May 2001
Location: Back In RI...............
Posts: 4,484
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Jastx
That's why I got the RUF spoiler control module for my C4S. It eliminated the rediculous up and down around town but did raise it at around 75mph. A great mod, I thought. They don't offer them new anymore from what I understand, so if you come across one, snap it up.
01-26-2006, 01:33 AM
#25
Originally Posted by Jeff96-993
If you want it up, all the time, with no warning light, then maybe the following would work...
Raise it up. Pull the plug. Jumper the pins.
Shouldn't that do it?
Raise it up. Pull the plug. Jumper the pins.
Shouldn't that do it?
01-29-2006, 01:27 AM
#26
Intermediate
Join Date: May 2004
Location: NC
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Just to confirm that I am not crazy, I disconnected the plug under the dash today as described on Robin's web site. And as I wrote in this thread, the cruise control stopped working. I don't understand why my 95 is different, but there it certainly behaves contrary to others on the forum. Could it be a design changover during the early production run?
Jim S.
Jim S.
