Garage art ideas
02-10-2020, 03:42 PM
#47
Rennlist Member
Kaferlab just upped their price to $199. I found them at https://www.johnnylawmotors.com/cata...tal-letter-kit for $149.95 & a 20% coupon popped up, so I got them for $119.96.
The following users liked this post:
ShdwFx (02-19-2020)
02-10-2020, 05:38 PM
#48
Rennlist Member
Kaferlab just upped their price to $199. I found them at https://www.johnnylawmotors.com/cata...tal-letter-kit for $149.95 & a 20% coupon popped up, so I got them for $119.96.
02-10-2020, 09:40 PM
#49
These threads make me feel so......inadequate
02-10-2020, 10:18 PM
#50
Rennlist Member
Originally Posted by Bigwood
These threads make me feel so......inadequate
02-18-2020, 09:15 AM
#51
Burning Brakes
Thread Starter
Porsche letters installed.
The following 7 users liked this post by Meenrod:
Coleman (07-02-2023),
Dryfly57 (02-18-2020),
gavonder (02-19-2020),
M. Schneider (10-06-2020),
NC TRACKRAT (02-18-2020),
and 2 others liked this post.
The following users liked this post:
911 (07-13-2023)
02-18-2020, 02:12 PM
#54
Rennlist Member
sign from my first Porsche dealer
02-18-2020, 06:48 PM
#55
Burning Brakes
Thread Starter
I drew a level line with pencil on the wall.
The letters are 8" wide, so the spaces between them need to be 8" too for the correct P O R S C H E spacing.
I nailed 2 small nails every 8 inches, one for each corner of the letter, and simply hung the letters on the two nails.
Finally, I ran a bead of clear silicone on the top edge of the letter where it can't be seen to secure them.
Took about 20 mins all in.
The letters are 8" wide, so the spaces between them need to be 8" too for the correct P O R S C H E spacing.
I nailed 2 small nails every 8 inches, one for each corner of the letter, and simply hung the letters on the two nails.
Finally, I ran a bead of clear silicone on the top edge of the letter where it can't be seen to secure them.
Took about 20 mins all in.
The following users liked this post:
911 (07-13-2023)
02-18-2020, 06:51 PM
#56
Burning Brakes
Thread Starter
The following users liked this post:
Coleman (02-19-2020)
02-19-2020, 11:57 AM
#57
02-19-2020, 01:03 PM
#58
Rennlist Member
Meenrod thanks for starting this thread and thanks to Coleman, NC Trackrat and Gavonder for the ideas and sourcing on the letters. While I liked the look of the raw metal, I took it just a step further and decided to paint the tops red but leaving the sides in their raw metal state. Then I made mounted them using cabinet magnets to a 1ft x 6 ft gray shelf from Home Depot. Overall I'm pretty happy how it turned out.
The following 4 users liked this post by ShdwFx:
02-19-2020, 10:22 PM
#59
Rennlist Member
Looks nice.
The following 2 users liked this post by Raven 666:
993Porsche (06-15-2024),
masti99 (02-21-2020)