When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Meenrod thanks for starting this thread and thanks to Coleman, NC Trackrat and Gavonder for the ideas and sourcing on the letters. While I liked the look of the raw metal, I took it just a step further and decided to paint the tops red but leaving the sides in their raw metal state. Then I made mounted them using cabinet magnets to a 1ft x 6 ft gray shelf from Home Depot. Overall I'm pretty happy how it turned out.
Unless you have absolutely no humidity in your garage, I would paint those metal letters. They will rust over time...especially where the spot welds are.
Did you get those silver letters off Ebay? I was wondering what they really look like in person as their pictures are fakey fakey looking. Just what are they made of? Do you like them?
I went in the direction of ShdwFx but used a black 1 x 6 shelf and painted the letters with a "hammered metallic" paint. I used two cabinet magnets per letter which made it easier to ensure that they stayed level. To hang it, I used hooks in the joists and eyes in the sign, then hung with chain to level it above the door. Since my garage is pretty crowded and rather dark, I need to find a nice spotlight to highlight the sign.
Unless you have absolutely no humidity in your garage, I would paint those metal letters. They will rust over time...especially where the spot welds are.
I have quite a bit of humidity in my garage, sometimes up to 80%, and I don't have any big rust issues with the metal letters, .. Maybe a bit of discoloration on the spot welds but the material itself seems to be impervious.. I'm talking about the 3-D versions, not the ones from "garage decor"
I have quite a bit of humidity in my garage, sometimes up to 80%, and I don't have any big rust issues with the metal letters, .. Maybe a bit of discoloration on the spot welds but the material itself seems to be impervious.. I'm talking about the 3-D versions, not the ones from "garage decor"
C/
Give it some time...I run a metal fab company and our unpainted inventory rusts sitting in the racks if it has spot welds...