Homelink during Reverse
#16
Burning Brakes
>> For MY22 they presented the homelink button at all times in the PCM, and changed the diamond button behavior so if only one profile is saved pressing it sends the open/close signal. A vast improvement but still not perfect.
Those are some simple / elegant fixes to a silly 'bug' - frustrating if they don't backport that to a PCM5 update. Given that it's just software it should be simple.
Those are some simple / elegant fixes to a silly 'bug' - frustrating if they don't backport that to a PCM5 update. Given that it's just software it should be simple.
#17
Rennlist Member
On my 23 the button is programmed and once pushed it opens and closes the door. On my 21 it would only pull up the homelink screen which was frustrating...1st world problem.
#18
Rennlist Member
Programming homelink was the same as any other vehicle for me. Push the programming button on the back of the door opener and then the Homelink button in the car. I had no issue programming for two separate doors.
#19
#20
I don't remember where exactly but it's definitely in the PCM menu somewhere. I'll take a look later tonight if you haven't found it yet.
The following users liked this post:
Frank996 (02-17-2023)
#21
#22
PCM6
Homelink
>Tap on the three dots next to your saved Homelink connection (...)
>Delete Location
This retains your connection but deletes the GPS saved location for said connection.
The following users liked this post:
Frank996 (02-17-2023)