When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Turbonite emblems and airbags on my 992 TTS (Arctic Gray) and 992 GT3T (GT Silver). . .
Protechparts.eu sells the entire airbag cover with the Turbonite badge. Could you share your experience of replacing this cover? I can't find information anywhere on how to do this in a Porsche airbag. Thanks on advance for your help.
Protechparts.eu sells the entire airbag cover with the Turbonite badge. Could you share your experience of replacing this cover? I can't find information anywhere on how to do this in a Porsche airbag. Thanks on advance for your help.
Not too difficult. Plenty of videos that show how to remove the airbag. After removing the (4) bolts, carefully separate the back cover from the airbag using a small pry bar. Then peel the front cover off the airbag. Repeat in reverse to assemble, taking careful note of the front cover orientation.
I thought the Ferrari specification in the frunk is a great idea, so why not get one created for my 2024 Porsche 911 Carrera T.
Examples of a Ferrari SF90 specification plaque.
Here is what I designed. Now need to find someone who can engrave one for me. It's actually two pieces of steel / aluminumm with one being the same paint color as Ruby Star Neo
Very cool idea. I’m sure an online or local trophy shop could pull this off. Something like this:
Not too difficult. Plenty of videos that show how to remove the airbag. After removing the (4) bolts, carefully separate the back cover from the airbag using a small pry bar. Then peel the front cover off the airbag. Repeat in reverse to assemble, taking careful note of the front cover orientation.
Has anyone bought leather parts (like visors, center console) from Exclusive Options in California? They look beautiful
I know there are a few threads that have em and people swear by their quality. I'm actually going to get my visors wrapped and maybe do some perforated leather in select areas of the car once it comes in.
Not too difficult. Plenty of videos that show how to remove the airbag. After removing the (4) bolts, carefully separate the back cover from the airbag using a small pry bar. Then peel the front cover off the airbag. Repeat in reverse to assemble, taking careful note of the front cover orientation.
Thank you for the information. I know how to remove the airbag because I have done it many times, but I have never disassembled the airbag to replace its cover, hence my fear of damaging something. From your description it looks relatively easy. Do you know what the tightening torques are for these 4 bolts?
I've tried over a dozen and they all say they can't do that. Font too think for engraving, and they don't do something that large... I've decided that it needs to be a laser engraving place so now I'm searching for one of them who can do this...
Thank you for the information. I know how to remove the airbag because I have done it many times, but I have never disassembled the airbag to replace its cover, hence my fear of damaging something. From your description it looks relatively easy. Do you know what the tightening torques are for these 4 bolts?
I didn’t bother with torquing them as all they do is secure the rear cover to the airbag. I was more concerned about clearance depth so I measured how far down the nuts were on the bolts and made sure they were tight and at the old depth. Haven’t had an issue so far… including needing a new airbag or teeth LOL!
06-20-2024, 09:28 PM
