What did you buy your 992 today thread
#3736
Advanced
We have the GT3 side skirts on order. Any tips or pretty straightforward? @cbditty
GT3 side skirts completed my carbon roof/mirror look and grounds the car. Love them.
GT3 side skirts completed my carbon roof/mirror look and grounds the car. Love them.
Relatively easy install but it's worth buying the tire ramps to give you a few inches so you can look underneath, use some 2x4's in a pinch. Take note of how the skirt covers both the front and rear wheel wells so you can be sure it looks the same when you put the new one on. Best advice is to watch the install videos on Youtube first. Just need to remove four screws, two torx 20 and two torx 30, plus the snap in clips underneath (maybe 8 of them). The four metal clips (take them off old skirt and put on new) can easily get moved when installing the skirt so be aware of that, if they get moved during install you can't screw it in and will have to pull off again. Took me three times for the first one to get it seated correct and FYI I pulled skirt from the front and installed from the front, that seems to be best, then you snap it in clip by clip. And be sure the skirt tucks slightly under the car bottom plastic, otherwise won't seat cleanly if on top of it.
Should take you no more than an hour for first one, and 30 minutes for second one.
The following users liked this post:
Jeff Whitten (11-07-2023)
#3737
Rennlist Member
getting there . . . .
#3738
No poured slab?
#3739
Racer
Relatively easy install but it's worth buying the tire ramps to give you a few inches so you can look underneath, use some 2x4's in a pinch. Take note of how the skirt covers both the front and rear wheel wells so you can be sure it looks the same when you put the new one on. Best advice is to watch the install videos on Youtube first. Just need to remove four screws, two torx 20 and two torx 30, plus the snap in clips underneath (maybe 8 of them). The four metal clips (take them off old skirt and put on new) can easily get moved when installing the skirt so be aware of that, if they get moved during install you can't screw it in and will have to pull off again. Took me three times for the first one to get it seated correct and FYI I pulled skirt from the front and installed from the front, that seems to be best, then you snap it in clip by clip. And be sure the skirt tucks slightly under the car bottom plastic, otherwise won't seat cleanly if on top of it.
Should take you no more than an hour for first one, and 30 minutes for second one.[/QUOTE]
re: Side skirt install....be sure to read through the DIY instructions...many miss the "click" when reattaching the large fasteners..all explained in the long thread
https://rennlist.com/forums/992/1264...rts-on-c2.html
Should take you no more than an hour for first one, and 30 minutes for second one.[/QUOTE]
re: Side skirt install....be sure to read through the DIY instructions...many miss the "click" when reattaching the large fasteners..all explained in the long thread
https://rennlist.com/forums/992/1264...rts-on-c2.html
Last edited by tomtomtomtom; 11-07-2023 at 04:38 PM.
#3740
Burning Brakes
#3741
the pit is useless… you have to build a 4-column bridge.
#3742
Rennlist Member
The following users liked this post:
Pivot (11-08-2023)
#3743
Rennlist Member
Join Date: Aug 2020
Location: Orange County California
Posts: 2,858
Received 2,721 Likes
on
1,281 Posts
#3744
#3745
#3746
Rennlist Member
Dude looks broke to me. Look at that clutter. Shame shame @Shogunade
@scott P long running forum joke.
The following users liked this post:
Scott P (11-08-2023)
#3747
Rennlist Member
The following users liked this post:
Rich_911T (11-08-2023)
The following 3 users liked this post by antsy:
#3749
Pro
Showed my wife the sonic garage cabinets I wanted ….. she did not have pleasant things to say to me about it
The following 2 users liked this post by Rich_911T:
Citadel911 (11-11-2023),
cyclingismylife (11-08-2023)
#3750