Mrcleanr6

They are brushed with trans gunmetal windows and silver face

RXP.

Aggressive sizing i know but what do you guys think on a 992 gts with CL.

Front 9.5J x 20 ET50
Rear 12.5J x 21 ET48

With some Neg camber, is there room for them to fit?

stock I believe is:
8.5 J x 20 ET53
​​​​​​​11 J x 21 ET66

Shogunade

The fronts you're fine.
I'm running 20x9 et35
Yhe back I think might work with crazy camber. I'm running 21x11.5 et50.

But since you're on CLs you should really double check. Also look up @tourenwagen . Hes running an aggressive set up and his car looks money.

Here's mine for reference: (Not lowered, no changes to camber)

Mrcleanr6

Does the gts have different clearances from the turbo s? The wheel sizes wheels boutique set me up with are 9.5fr and 12.5rear. No idea what the offsets are though. I have seen them say in thir videos they ca squeeze a 13 in the rear if 2-3 piece

RXP.

love your set up bud.

yea the rear would poke out about 16mm more than yours. its tight isnt it!?

hmm will have to think about it. love TW set up his car look straight fire!

Tobeit

With 12.5 and 48 offset in rear ...I would not do that and JMO it will look bad. Either looks like a truck with wheels poking out or you camber the heck out of it and it will look like a slammed ride on bags when lowered. Here is my rear and your rim would poke 21mm (!!) more out.

Shogunade

Thanks.
I found tourenwagens rear setup: [size=16px]FMR 21x11.5 ET58 with 14mm spacer. So et44. He also told me he has crazy camber. So yea. I don't think your idea's gonna work for the rear. [/size]

RXP.

thanks gents. I guess that dream is dead. Onto the next.

tourenwagen

As @Shogunade said I'm at ET44 in the rear and this pic is dialed in with 992 GT3RS camber specs and there is still a bit of poke...

Yeah it might be a little too aggressive especially being 12.5 wide. Your offset is almost the same as mine (ET48) but you would stick out by almost another half inch past this pic.

eclou

You'd have to run Tokyo Drift madddd rear camber to make that even close to working

RXP.

lol! yes I suspect you might be right there.

They were the 991.1 RS wheels.

Really not sure which way to go, car is coupe with LW pack (buckets), PCCBs etc. I am based in the UK, here there is not a great culture like you guys have over in the states. People do change wheels on their 992, but its extremely rare. So resale is a bit of an issue, in fact I haven't seen any aftermarket used wheels for sale for the 992 GTS/Turbo S or GT3 in over a year.

Hence my thinking to buy something OEM that "might" fit. However it seems like that's a no go scenario.

Thanks for all the help gents, open to any suggestions/options. Even if anyone is willing to ship their wheels from the States.

RXP.

Jeez Louise that is stunning. Congrats.
​​​​​​Are your wheels heavier than OEM? If so, do you feel any difference in how the car drives etc?

This is me:

Shogunade

Are you set on OEM? Why not just go aftermarket?

If you want to get them from the States ebay just started a program where they facilitate international shipping for sellers. The seller ships to a hub in the states and eBay takes care of the rest. Might be worthwhile.

GL and great looking black car.

William992

HF-5 , stock tire size but they are completely flush. Car really needs a drop...

alin2

Clean for the 10 seconds after washing and before getting covered in brake dust again...