When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So that larger gap in your passenger side(2nd picture) is how it's supposed to be?
I believe so, yes.. but the passenger window is precariously close to hitting the quarter panel as well. I very rarely have passengers so I’m wondering if that’s the only reason why it’s safe so far.
I had to run out and look at the gap between my door windows. Here is a pic of the passenger side windows with window up. There is a pretty large gap between the windows. .About 3/8". Same with driver's side. I don't see the possibility of any contact between these two windows at least in my car.
can you close your door very slowly and see if the window is close to making contact?
Well, I’m just gonna take a step back here and say I hope everyone gets to enjoy their GT3 the way it was meant to be, and not have to worry about things like windows cracking due to poor assembly, materials, or both. This could be a multi-stage issue with more than one fix needed.
Hope everyone gets it sorted.
One thing for sure I’ll say is that Porsche does a great job picking up the tab when they are wrong.
can you close your door very slowly and see if the window is close to making contact?
Originally Posted by jfr0317
I tried this, and the front side window comes within less than 1/16" of the leading edge of the rear side window.
I just tried this and the door window does get a bit closer when you open the door because the window shifts down slightly and towards the side window . Still had about 1/4" clearance though when I re-shut it. I can see how a little misalignment can cause contact.