When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Great little camera, being installed with a joyeauto carplay setup.
Hey Aaron,
Let me know how that works out as it's the one thing I haven't tackled as of yet. Now we need to get side by side to compare exhaust notes! Ran up Geiger Grade for the first time since installing the headers and exhaust...........Wow the sound is exhilarating with the windows down!
Here's a pre-exhaust run into Virginia City.....https://www.dropbox.com/s/r9jgiotuvt...20342.mp4?dl=0
Hey Aaron,
Let me know how that works out as it's the one thing I haven't tackled as of yet. Now we need to get side by side to compare exhaust notes! Ran up Geiger Grade for the first time since installing the headers and exhaust...........Wow the sound is exhilarating with the windows down!
Here's a pre-exhaust run into Virginia City.....https://www.dropbox.com/s/r9jgiotuvt...20342.mp4?dl=0
It was a pain in the ***! haha at least the run from the bumper to the interior was.........but a MUST have with these cars, especially with the convertible though as it's impossible to see anything without one.
My exhaust is LOUD with the PSE switch on but quiet as stock without and under 5k rpm. Can't wait to do a side by side with yours, weather is getting better to where we can do this finally.
ah - very cool. Sometimes the little things are the most rewarding. I'm still on the fence with a manual shift boot.
Originally Posted by uphoto
I was too but found a great deal on a used one and gave it a go, really love the look of it!
Same here... Can't decide between the striped plate or the manual shift boot. First world problems for sure. If I could find a used one, I'd probably go that route so I don't have the "+/-" issue.
Same here... Can't decide between the striped plate or the manual shift boot. First world problems for sure. If I could find a used one, I'd probably go that route so I don't have the "+/-" issue.
Actually in the meantime I ordered $18 of Wrap and tried my luck on the dash trim (not the best wrapper here and the cupholder is tricky). It's alright. I'm gonna wait to see if it grows on me or not in color or if it's too "pimp my Porsche" for me, and if I still like it next week I will get them painted properly, eventually... Still - $18 vs $1220 of non-available parts, yikes.
Also while wrapping, I had an aircooled 911 damaged engine lid, I decided to wrap some more and make a deco for the wall - not finished but you can see bubbles on that ;-)
I don't know much about wrapping.... is it possible to wrap the door blades where the full cow cars get an insert?
If you can take them off to paint, you certainly can take them off to wrap. I guess the difficulty lies in finding a color that is a nice match to your car - mine being white it wasn't too hard.. Removing the blades from the door is a more involved exercise than just the dash though - plenty of threads on that. I'm not going that far..
Actually in the meantime I ordered $18 of Wrap and tried my luck on the dash trim (not the best wrapper here and the cupholder is tricky). It's alright. I'm gonna wait to see if it grows on me or not in color or if it's too "pimp my Porsche" for me, and if I still like it next week I will get them painted properly, eventually... Still - $18 vs $1220 of non-available parts, yikes.
Also while wrapping, I had an aircooled 911 damaged engine lid, I decided to wrap some more and make a deco for the wall - not finished but you can see bubbles on that ;-)
Really tempted to do the same. I don't think I'm skilled enough for a DIY, I was contemplating to do air vents to (if possible). Need to get a quote. I have no idea how much it might be.
Finally got around to protecting my drivers side door from Big Foot!
Every time I have to pull into my narrow garage with both cars I can't open the door completely and I sometimes scuff the leather door pocket with the toe of my shoe. Nothing major but why ruin a pristine leather panel. I ordered a small roll of thick carbon fiber look vinyl and applied a replaceable scuff protector. I had installed a test one a few months ago and it worked fine so I finally got around to making a better fitting one. Being on the door bottom, you can't even tell it's there but it does work.
Finally got around to protecting my drivers side door from Big Foot!
Every time I have to pull into my narrow garage with both cars I can't open the door completely and I sometimes scuff the leather door pocket with the toe of my shoe. Nothing major but why ruin a pristine leather panel. I ordered a small roll of thick carbon fiber look vinyl and applied a replaceable scuff protector. I had installed a test one a few months ago and it worked fine so I finally got around to making a better fitting one. Being on the door bottom, you can't even tell it's there but it does work.
Wonderful idea, don't know how i did not think of it. So doing this!