When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Is there a good place to buy them from? GetPorscheParts is charging $30 shipment (unless >$500), and a lot of other places do not specify R or L (it's the same part #)...
I got mine from a dealer out west. The price was good, but they charged me $60 for shipping.
991-504-596-86-OK1 is right
991-504-595-86-OK1 is left
I would love to replace my side skirts (50th) with the ones from the new 2021 TURBO S. Anyone have any ideas? Technically I don't believe it will fit. perhaps a third party?
Just ordered Elephant racing front offset camber plates and rear upper shock mounts + front and rear sway bar drop links. Excited to pair this up with my B16s. Might also pickup the FF tranny mount insert.
I would love to replace my side skirts (50th) with the ones from the new 2021 TURBO S. Anyone have any ideas? Technically I don't believe it will fit. perhaps a third party?
If you have 50th, I would leave it as is. 50th is iconic and limited run 911. I wouldn't touch anything in terms of body/aerodynamic wise.
I got mine in the mail Saturday, is there a FAQ here on how to swap them out? I know it's simple but also don't want to break anything...
When I changed my side markers they were certainly not as easy to remove as per the videos. Based on a comment I came across on the forum I made a loop out of duct tape to hook around the front corner of the light to gain some leverage, and they popped right out when I pulled (figured better than risk a scratch trying to pry them out).
When I changed my side markers they were certainly not as easy to remove as per the videos. Based on a comment I came across on the forum I made a loop out of duct tape to hook around the front corner of the light to gain some leverage, and they popped right out when I pulled (figured better than risk a scratch trying to pry them out).
Thanks, I will try that when I mess with it this weekend. Makes sense as to avoid any nicks/scrapes where you can.
Thanks, I will try that when I mess with it this weekend. Makes sense as to avoid any nicks/scrapes where you can.
I found pushing backwards hard and then pushing the rear most part of the lense, popped out the front corner quite easily. Literally took about 5 seconds to pop it out.
Simply unplug and reinstall in reverse order. It is as easy as most have said. It was one of the first mods I did on my car. Completely changes the look.
GL!
Started with the usual suspects...clear side markers and Zunsport grills. GTS re-badge.
Next: window tint, my guy is sick with Covid so it will be a couple of weeks.
Suspension...some form of springs or coilovers and DSC module.
Soul sport cats - ordered and waiting.
02-01-2021, 01:18 PM
