When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
[QUOTE = rchaas; 16577642] Beaucoup de support pour un petit bâton, mais je l'aime mieux que les plus gros extincteurs. Apparemment, cela dure un peu plus longtemps, j'espère que je n'aurai jamais à le découvrir.
[/ QUOTE]
Beautiful that, did you buy that or... and fixation?
I installed them on my GTS. I had them for a long time before installing as I was afraid of it looking like a cheap sticker overlay. It takes some patience to get them aligned up but it’s not that difficult. Just keep them soapy wet and you have plenty of working time.
To be honest it’s by far the cheapest mod on my car and they look way better than I expected. I have PPF on headlights and the film stops short on one edge. You can see a slight line at this location but only close up. If your applying over a flat headlight I would go as far to say that no one will be able to tell it’s a vinyl overlay.
Go for it
Well, like I said, ordered a set. Did it this weekend. Definitely need a bit of patience with it. The only thing I sort of disliked is the additional length at the bottom of the headlight that overlapped a bit. If you look close enough and know what you're looking for, you can see it in person, but otherwise very happy with the results. Looks so much better with a majority of my car being blacked out/tinted. Would definitely recommend for those that don't care for the silver outline.
[QUOTE = rchaas; 16577642] Beaucoup de support pour un petit bâton, mais je l'aime mieux que les plus gros extincteurs. Apparemment, cela dure un peu plus longtemps, j'espère que je n'aurai jamais à le découvrir.
[/ QUOTE]
Beautiful that, did you buy that or... and fixation?
purchased fittings from Rennline. Affiixed by the two OEM front seat bolts. A bit of seat wiggling to align, but once bolts are threaded, it all fits nicely.
I'm looking at the Sport Steering wheel w/ paddles- currently the car has just the thumb-buttons, not even multi-function!
Also looking to replace the instrument dials in Guards Red, since my C2 has such on the Sport Chrono clock, as well as red seatbelts. May even replace the 'dummy key' in Guards Red too. Is a nice offset to the Luxor Beige full leather interior w/ exterior matching stitching.
purchased fittings from Rennline. Affiixed by the two OEM front seat bolts. A bit of seat wiggling to align, but once bolts are threaded, it all fits nicely.
Which Rennline mount did you use? They have a number of them, but except for the roll bar mount, all seem to be for larger extinguishers, not the Element one.
Which Rennline mount did you use? They have a number of them, but except for the roll bar mount, all seem to be for larger extinguishers, not the Element one.
04-25-2020, 07:47 PM
I call this set "B Forged". 
