How did you mount your phone?
#31
I just ordered this from ebay,
iphone6 magnetic holder using the CD mount slot.
I wasn't going to buy, but I saw the picture and it is on same PCM as the 991 interior!!!
Maybe it is from another Porsche model....
It looks good! I hope the quality is good, and the magnet is strong.
iphone6 magnetic holder using the CD mount slot.
I wasn't going to buy, but I saw the picture and it is on same PCM as the 991 interior!!!
Maybe it is from another Porsche model....
It looks good! I hope the quality is good, and the magnet is strong.
#32
Nordschleife Master
Having this CD mount blocks the PCM - does that matter to you? The reason this mount would not work for me.
#35
I use the Kenu Airframe, I thought a vent mount solution would be total crap but this thing is solid. Well designed, inexpensive, and no sticky tape or any other stuff that can affect the finishes on your interior.
http://www.kenu.com/products/airframe
http://www.kenu.com/products/airframe
#36
RL Community Team
Rennlist Member
Rennlist Member
#37
Banned
I use this one on the left vent. I love it. Didn't think I would and was very skeptical. It is out of the way yet accessible when needed.
http://t.brookstone.com/airframe-plu...907473p&catId=
http://t.brookstone.com/airframe-plu...907473p&catId=
#38
Rennlist Member
I just received my T-Design mount and it works great. Installed in 30 seconds on the right side of the PCM screen and positions the phone perfectly for how I use it. Easy to see and easy to interact with. Also very easy to run a black iPhone cable from the phone to the glovebox without the appearance of ugly cords everywhere. Sorry for the low quality photos but it was raining and I didn't want to leave the garage
Wow, there are a lot of buttons, lights and indicators going on in this photo!
Clear view of the screen and easy to control.
Close up shot showing how clean this installs looks from the driver side.
A little less clean looking from the passenger seat but an improvement over storing the phone in the passenger side netting and asking my wife to control it for me
Wow, there are a lot of buttons, lights and indicators going on in this photo!
Clear view of the screen and easy to control.
Close up shot showing how clean this installs looks from the driver side.
A little less clean looking from the passenger seat but an improvement over storing the phone in the passenger side netting and asking my wife to control it for me
#39
Nordschleife Master
This setup does not allow you to use the all important and extremely useful cupholder!!!
#40
Rennlist Member
LOL! That is an undocumented feature. I honestly wish that I could remove the little cup holder icon and seal that damn thing shut. The only purpose it serves is that my kids love to keep playing with it, likely right up until they break it And I think the little cup icon looks silly, like Porsche sponsored by McDonalds.
#41
If you do a search for Wireless Qi charger, it's one of the most common ones that pops up.
Richard
#42
How does it remain secure? There is obviously something going between PCM and trim - but what prevents it from coming loose?
I just received my T-Design mount and it works great. Installed in 30 seconds on the right side of the PCM screen and positions the phone perfectly for how I use it. Easy to see and easy to interact with. Also very easy to run a black iPhone cable from the phone to the glovebox without the appearance of ugly cords everywhere. Sorry for the low quality photos but it was raining and I didn't want to leave the garage
Wow, there are a lot of buttons, lights and indicators going on in this photo!
Clear view of the screen and easy to control.
Close up shot showing how clean this installs looks from the driver side.
A little less clean looking from the passenger seat but an improvement over storing the phone in the passenger side netting and asking my wife to control it for me
Wow, there are a lot of buttons, lights and indicators going on in this photo!
Clear view of the screen and easy to control.
Close up shot showing how clean this installs looks from the driver side.
A little less clean looking from the passenger seat but an improvement over storing the phone in the passenger side netting and asking my wife to control it for me
#43
Rennlist Member
The phone mount is attached to a metal bracket that very easily slides between the edge of the PCM display and the surrounding trim. It slides in with just the smallest amount of force and so far it seems to stay put quite well. Time will tell if it loosens up but no evidence of that so far.
#44
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Hi everybody. I'm Vlad, guy who makes T-Design mounts. Not one but two of my customers referenced me to this thread. So I thought I'd better chime in and introduce myself.
I have an 981S Boxster and pretty heavy case of OCD common among Porsche owners When I realized there is no good way to mount a phone in a Porsche without wires hanging all around the place, and without phone and suction cups falling down, and without it all looking like a monstrous monstrosity... I came up with an idea and custom made one for myself. My objectives were 1) Simple, clean look 2) Great visibility and usability for Nav and music 3) Fast, easy, one hand operation when you want to insert the phone, and when you need to grab the phone.
It turned out all right. So I posted it on the other forum and people got excited and wanted it too, and that's how it all started 3 years ago. As it's tailored for Porsche and the market is very small - I still assemble those mounts myself, in my kitchen This also allows me to ensure quality of every single piece.
I was also suffering from having no sunglass cabbie. As I wear prescription sunglasses and I change glasses every single time I enter and exit car in summer... So that's how my other thing - Sunglass Holster was created. It helps you grab sunglasses in one second.
It can all be found at T-Design9.com
Here's my car in Vermont, state my plate fits well in
I have an 981S Boxster and pretty heavy case of OCD common among Porsche owners When I realized there is no good way to mount a phone in a Porsche without wires hanging all around the place, and without phone and suction cups falling down, and without it all looking like a monstrous monstrosity... I came up with an idea and custom made one for myself. My objectives were 1) Simple, clean look 2) Great visibility and usability for Nav and music 3) Fast, easy, one hand operation when you want to insert the phone, and when you need to grab the phone.
It turned out all right. So I posted it on the other forum and people got excited and wanted it too, and that's how it all started 3 years ago. As it's tailored for Porsche and the market is very small - I still assemble those mounts myself, in my kitchen This also allows me to ensure quality of every single piece.
I was also suffering from having no sunglass cabbie. As I wear prescription sunglasses and I change glasses every single time I enter and exit car in summer... So that's how my other thing - Sunglass Holster was created. It helps you grab sunglasses in one second.
It can all be found at T-Design9.com
Here's my car in Vermont, state my plate fits well in
Last edited by t-design; 08-17-2015 at 11:59 AM.
#45
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Notice how solid the mount is during max Gs. You can see power cord flying around but the phone is glued in place:
@1:40
https://vimeo.com/91921581
Last edited by t-design; 08-17-2015 at 12:55 PM.