When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The top polypropylene cap is huge & will be hard to fit into the space you have to work with.
The electrolytic cap will be fine.
What are you replacing the tweeter with? 47uF is probably too large for a tweeter to do much good for its intended purpose.
The top polypropylene cap is huge & will be hard to fit into the space you have to work with.
The electrolytic cap will be fine.
What are you replacing the tweeter with? 47uF is probably too large for a tweeter to do much good for its intended purpose.
This is a good capacitor for the Bose tweeter replacement. Have not yet decided actual tweeter. Dayton Audio seems to have favorable reviews when swapped in Bose systems.
Anyone know of any links with detailed instructions on how to remove and replace the subwoofer. I went through this thread and the links that were posted years ago don't seem to have the relevant information anymore. Thanks!
Hey folks, and sorry for necroposting. I own panamera 2012 and want to do some sound upgrade as well. It seems like part numbers for speakers are the same and I already replaced 2 rear tweeters. My question is related to impedance. I've read on other forums that putting lower impedance tweeters are actually makes amp life shorter. SO is it safe to replace bose's woofers with burm ones? Also I have opportunity to purchase full burmester kit including all speakers, amp and subwoofer for ~$1300. How hard would be to replace everything with burm? I read that burm amp has different harness, but besides just harness are there any wiring difference(or new wires needed) ?
03-27-2020, 04:52 PM
