Experience with Cobb tuning?
#31
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
While everyone is bickering about APR vs Cobb, I'll just stir the pot a little more and add one more plug for Softronic. From what I understand, he's got some 30 years or so experience tuning Porsche race cars. Can't say whether or not his is the best tune out there but I trust it with my car which also under Fidelity warranty like yours. I have no dyno results but they claim ~ 100 HP increase over OEM and I can tell you first hand it's magnificent. It was an easy DIY in the comfort of my own garage and easily reversible.
#32
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The crappiest thing about MyGenius is that it doesn't allow you to datalog (at least that's my understanding). If I keep my 911 stock (ie. no I,H,E) then I would likely lean towards getting a Softronic tune as well, since I'm not in for max power; I like the idea that I can reflash back to stock if I wanted to.
#33
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I prefer tuning in real world condition at the track 3rd gear pull with the real air flow etc.. then send the log to my protuner i think this is more accurate tuning then remote dyno tuning imo
#34
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
This whole secret sauce tune thing is such a joke. There are tables and limits that can be adjusted, its run on math. I think its pretty well known by now what tables do what and what the limits are. Yes mods to cars will allow for different variations and doing dyno runs will allow for you to get to the highest limits. That being said Limits are exactly that and bumping them on the reg is never a good thing long term.
#36
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I know some people don't like to hear this, but Porsche (and any car company) invests hundreds of millions or even billions in each new engine and trans. They perform a lot of simulations and tests and have extensive resources. I'm sure the folks at Cobb are great, but it is a small shop and *personally* I would not take the chance of trusting a small shop with minimal resources to crank up the boost for more power - especially without replacing pistons, connecting rods, etc. My friend just did this with his 335i through Dinan (very reputable) and his engine now needs a rebuild (smokes and consumes a ton of oil). You will likely get lucky, but you may not.
#37
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I know some people don't like to hear this, but Porsche (and any car company) invests hundreds of millions or even billions in each new engine and trans. They perform a lot of simulations and tests and have extensive resources. I'm sure the folks at Cobb are great, but it is a small shop and *personally* I would not take the chance of trusting a small shop with minimal resources to crank up the boost for more power - especially without replacing pistons, connecting rods, etc. My friend just did this with his 335i through Dinan (very reputable) and his engine now needs a rebuild (smokes and consumes a ton of oil). You will likely get lucky, but you may not.
#38
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Dyno tuning is ultimately the best way, as long as it's on a load bearing dyno. Whether it's a custom in person dyno tune or a remote tune. I've usually had either dyno tunes or street tunes in the past with my other cars, but softronic will be fine for me this time. I see it as a good in-between
I think for what 4point0 has been chasing, a dyno was probably the best way to tune. For others, data logging on the street and then tuning off of that can work well also. Especially if your tuner lives in the area where you primarily drive your car. Similar/same atmospherics.
The following users liked this post:
Pb Pedis (07-09-2022)
#39
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I know some people don't like to hear this, but Porsche (and any car company) invests hundreds of millions or even billions in each new engine and trans. They perform a lot of simulations and tests and have extensive resources. I'm sure the folks at Cobb are great, but it is a small shop and *personally* I would not take the chance of trusting a small shop with minimal resources to crank up the boost for more power - especially without replacing pistons, connecting rods, etc. My friend just did this with his 335i through Dinan (very reputable) and his engine now needs a rebuild (smokes and consumes a ton of oil). You will likely get lucky, but you may not.
The following users liked this post:
GT3FZS (07-28-2022)
#41
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Last edited by 911f; 07-06-2022 at 11:01 PM.
#42
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I know some people don't like to hear this, but Porsche (and any car company) invests hundreds of millions or even billions in each new engine and trans. They perform a lot of simulations and tests and have extensive resources. I'm sure the folks at Cobb are great, but it is a small shop and *personally* I would not take the chance of trusting a small shop with minimal resources to crank up the boost for more power - especially without replacing pistons, connecting rods, etc. My friend just did this with his 335i through Dinan (very reputable) and his engine now needs a rebuild (smokes and consumes a ton of oil). You will likely get lucky, but you may not.
Also, Steve Dinan sold his company with his name a while back. Not sure if Dinan the company has the same reputation of quality as they did when Steve owned it. His new tuning company is https://carbahn.com, and he seems more focused on MB V8 turbo engines these days, but he still does BMW and others as well.
Last edited by MingusDew; 07-06-2022 at 11:27 PM.
#43
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Well I admit I dont know **** as Im an Entomologist
just that there are specific tables and limits that are known and addressed by many of the "tuners" so the whole secret sauce thing is the most annoying part of this discussion. I forgot which one I spoke to but once I started asking specific questions as to why his approach was different he started doing the run around and suddenly I found us off topic talking about ECUs from a different car.
![Cool](https://rennlist.com/forums/images/smilies/cool.gif)
#44
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Surprised there is so much skepticism about ProTunes in this forum. I can see how it may be seen as excessive for a mildly modded car, but there is no substitute for a bespoke tune file created just for you and your specific vehicle with your particular mods and your density altitude running your local fuel etc etc. You’re never going to get better results with an off the shelf tune file intended for broadly based conditions and mods to suit a large customer base by using the same tune file for everyone. I tried the OTS route first! But the custom ProTune was a game changer and the only legitimate way to match performance with longevity. The Cobb is just a conduit. It’s a tool to collect all the data (there are many others) and load the new files. The value add from the tuner comes from interpreting the data to create an adjusted file that really works just for you. For myself, I datalog on the street or the track since that’s where the car is driven.
#45
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Surprised there is so much skepticism about ProTunes in this forum. I can see how it may be seen as excessive for a mildly modded car, but there is no substitute for a bespoke tune file created just for you and your specific vehicle with your particular mods and your density altitude running your local fuel etc etc. You’re never going to get better results with an off the shelf tune file intended for broadly based conditions and mods to suit a large customer base by using the same tune file for everyone. I tried the OTS route first! But the custom ProTune was a game changer and the only legitimate way to match performance with longevity. The Cobb is just a conduit. It’s a tool to collect all the data (there are many others) and load the new files. The value add from the tuner comes from interpreting the data to create an adjusted file that really works just for you. For myself, I datalog on the street or the track since that’s where the car is driven.