Andy515

looks like an OE reproduction but with the same mounting style as the OE (i.e. remove the motorized spoiler and replace the mounting plate). If you are going aftermarket this mounting style would definitely be preferred over attaching one to the motorized spoiler as you can just have Porsche reprogram the PCM for sport design package and everything works.

Joec500

yup 100% agree! This is how the oem one is mounted. Def go this route if not going oem

Fast Tony

Just picked up my 991 911 GTS w Ducktail fixed wing.

i noticed on the right side the wing doesn’t lay flush with the bumper/rear taillight

its off about 1/2 inch or so but enough to drive me crazy looking at it.

does anyone have any input on how to resolve this issue. I will attach some pics

thanks!

Flat

This is the side its up on. Above rear taillight

desmotesta

Is this OEM or aftermarket

Fast Tony

What rear diffuser do you have on this beast?

looks amazing

Fast Tony

This is OEM

desmotesta

No idea what is going on here. Given that there is one latch in the middle, we cant attribute this to a misaligned latch. Have you measured/checked to see if the Ducktail is defective/bent? (since your lights, GTS grill and bumper seem to line up equally on both sides)

Fast Tony

I have not tried to measure , i will do that tonight and see.

It could be defective. I’m just curious how no one has spotted it but me lol.

i was gong to remove the entire duck tail and reinstall seeing where the problem is.

or might bring it to Porsche and have them mess around with it (last resort)

I will update you on the measures tonight

desmotesta

check and compare the mounting points also, see if the right side mounting point is misaligned when compared to the left

The point to the right of the green circle

Andy515

there are adjustment screws on the spoiler itself on the underside. Remove it by removing the two screws under the engine bay lid and slide it forward and up. Once off there are four adjustment screws (hand screws two on each side). Screw that one in more until it lays flat. Keep playing with it until you get it to your liking. To re-install just line up the notches on the mounting plate and slide back into place (towards you) and re attach the screws (8 nm)

Fast Tony

Awesome thank you for this.

do i have to remove the engine shroud cover prior to removing the 2 screws attached to the ducktail.

Andy515

nope. Just the screws- there is enough clearance to slide it off without taking the cover off.

Andy515

Coffee with a view

skl

Waiting for someone to make one for the dot 2 cars so they'll work with the intercoolers, etc. My son just put a ducktail on our 993 and love the "look".

PorscheC2S

Not the greatest picture but this is mine. Just had it mounted before it goes in for paint.