When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
looks like an OE reproduction but with the same mounting style as the OE (i.e. remove the motorized spoiler and replace the mounting plate). If you are going aftermarket this mounting style would definitely be preferred over attaching one to the motorized spoiler as you can just have Porsche reprogram the PCM for sport design package and everything works.
looks like an OE reproduction but with the same mounting style as the OE (i.e. remove the motorized spoiler and replace the mounting plate). If you are going aftermarket this mounting style would definitely be preferred over attaching one to the motorized spoiler as you can just have Porsche reprogram the PCM for sport design package and everything works.
yup 100% agree! This is how the oem one is mounted. Def go this route if not going oem
No idea what is going on here. Given that there is one latch in the middle, we cant attribute this to a misaligned latch. Have you measured/checked to see if the Ducktail is defective/bent? (since your lights, GTS grill and bumper seem to line up equally on both sides)
Just picked up my 991 911 GTS w Ducktail fixed wing.
i noticed on the right side the wing doesn’t lay flush with the bumper/rear taillight
its off about 1/2 inch or so but enough to drive me crazy looking at it.
does anyone have any input on how to resolve this issue. I will attach some pics
thanks! Flat This is the side its up on. Above rear taillight
there are adjustment screws on the spoiler itself on the underside. Remove it by removing the two screws under the engine bay lid and slide it forward and up. Once off there are four adjustment screws (hand screws two on each side). Screw that one in more until it lays flat. Keep playing with it until you get it to your liking. To re-install just line up the notches on the mounting plate and slide back into place (towards you) and re attach the screws (8 nm)
Waiting for someone to make one for the dot 2 cars so they'll work with the intercoolers, etc. My son just put a ducktail on our 993 and love the "look".