When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Got a message that my right rear tire was 6psi low. I found a screw and removed it and tried a tire repair kit I bought for my track kit. Screw came out easy as did the air in the tire. the reaming tool went in & out easy. But when I tried to put the plug in, it would not go through the hole. I tried twisting, banging the tool with the palm of my hand. nothing worked. finally after much cursing it went in enough to stay when I pulled the tool out. seems to be holding air but Ill check it in the AM. This was done in my warehouse at work on a lift. couldn't imagine doing this on the side of the road. Anyone have tips? or did I forget a step?
Time for new shoes!
I just found out I have a flat on the rear right (seems everyone gets a flat on that tire). Haven't had a chance to look for the culprit, will do so tomorrow.
I just found out I have a flat on the rear right (seems everyone gets a flat on that tire). Haven't had a chance to look for the culprit, will do so tomorrow.
Crap
Prob cuz it's the widest tire and closest to the shoulder where nails etc like to hang out.
Our tires have an amazingly strong internal carcass. You need to rasp the puncture, or else you're never going to be able to get the plug and plug tool into the tire.
Pro tip : overinflate the tire before attempting the tire repair. This will make the insertion of the reamer and tire plug much easier and the plug will hold better. Trying to ream or insert the plug tool on a tire with very low pressure is difficult and the plug will not hold as efficiently.