991.2 COBB tune - Impressions and Dyno
#361
991.two Nice. A gain of > 100 TQ at 3300 rpm with the tune (and supporting mods). Impressive solid +60 TQ throughout the rest of the rpm range.
#362
It was OTS 1.04.
1.05 and 1.06 greatly smoothed out the torque so that it didn't feel like such a huge hit early on. I think it improves the feel greatly. Not to mention, backfires and the boost are now consistent with Porsche's OEM. 1.04 had backfires in Sport+ and none in Sport -- addressed with the latest releases.
1.05 and 1.06 greatly smoothed out the torque so that it didn't feel like such a huge hit early on. I think it improves the feel greatly. Not to mention, backfires and the boost are now consistent with Porsche's OEM. 1.04 had backfires in Sport+ and none in Sport -- addressed with the latest releases.
#363
Burning Brakes
So I remove my ECU and send it to Cobb correct ? Then it comes back with a control unit that I can down load different maps 2 ?
sorry I have never done this.
advise
matt
sorry I have never done this.
advise
matt
#364
Yes. They return your ECU and an Accessport to you and you can change maps whenever you want. Very easy process.
The following users liked this post:
Ukkid74 (11-24-2019)
#365
Burning Brakes
Thx 4 all the help. I ll give u an update
#366
It sounds like some of the older maps had more issues with PDK cars than manual transmissions. For those of us with a manual gearbox can we still run the older maps or are they no longer available?
The following users liked this post:
Ukkid74 (11-25-2019)
#367
I've had no luck with traction on, PSM sport, or PSM off. I have a Mitch pro-tune with 3 maps. The 93 map is 562hp/538tq and still misses the 3rd-4th shift half the time, even after a PDK relearn. The 91map (542hp/502tq) has not missed the shift since the relearn, and is smooth and strong- 91 map does 7.66sec 60-130, and 130 in the quarter I think there's a PDK torque limit that can not be exceeded until someone comes up with a PDK tune.
As for mine (manual), i did replace stock control arms with Tarett adjustable control arms and took some camber out. I was not able to put power down on 2nd gear and 3rd on protune for a base car. I now could.
The following users liked this post:
GTRR (12-13-2019)
#369
Rennlist Member
Check out the solution Peter did on his upgraded turbos and able to put power down. He has manual though but I believe it should help https://www.************.com/showthr...946#post830946
As for mine (manual), i did replace stock control arms with Tarett adjustable control arms and took some camber out. I was not able to put power down on 2nd gear and 3rd on protune for a base car. I now could.
As for mine (manual), i did replace stock control arms with Tarett adjustable control arms and took some camber out. I was not able to put power down on 2nd gear and 3rd on protune for a base car. I now could.
Horrible 60' time, but the trap speed/hp is there at 130mph on the 91 tune, and it doesn't miss the 3-4 shift.
#370
LCA's to take camber out? We are on a different mission, I have adjustable LCA's and run -3.0front,-2.5 rear for the track. That definitely doesn't help with wheel spin
Horrible 60' time, but the trap speed/hp is there at 130mph on the 91 tune, and it doesn't miss the 3-4 shift.
Horrible 60' time, but the trap speed/hp is there at 130mph on the 91 tune, and it doesn't miss the 3-4 shift.
Peter went different route and he has upgraded turbos (650 ps) so I thought worth checking out for you. See his comments in other thread, too. They're all there.
#371
I think you're misunderstanding fsmich.... he's trying to NOT have the rear tire contact flat on the ground He's running -2.5 camber in the rear for max cornering grip.
The following users liked this post:
Ukkid74 (12-19-2019)
#373
Sold it and when back to Porsche, then AMG, now back to Porsche again. Never should have left. Welcome to Porsche, I can tell that you are already satisfied with your decision.
#374
Racer
#375
Rennlist Member
Best additional gains for the buck will come with BMC intake filter and either race cats or catless pipes.
You are using 93 octane, right?
You are using 93 octane, right?