go.illini's radar detector hard wire install
#46
Yep, tried that, and everything else I could think of.....and I’m not a novice, I’ve wired an airplane instrument panel myself in the past.
I’m satisfied with how it’s done. Assuming it doesn’t fail the “spirited driving” test tomorrow by shaking loose, I’ll most likely leave it alone.
I’m satisfied with how it’s done. Assuming it doesn’t fail the “spirited driving” test tomorrow by shaking loose, I’ll most likely leave it alone.
#49
Registered an account here for the sole purpose of thanking you for this guide. It took me about 5 minutes to hardwire my detector because your post is so detailed — I literally spent more time picking the exact spot for my mount and getting it perfectly straight than I did on the install. Thanks so much!
#50
Just completed this with my 2019 Carrera T and worked like a charm - 30 mins or less!
Only difference was that my plug was also blue on both sides, however, the wire colors were exactly the same.
Escort Max Ci
Blend mount
15' Mirror Tap.
Only difference was that my plug was also blue on both sides, however, the wire colors were exactly the same.
Escort Max Ci
Blend mount
15' Mirror Tap.
#53
Fantastic post. Thanks! Having a Blendmount and a V1, it seems like the best location for the wire to exit, from a day to day prospective, would be just above the base of the mirror (circled red). The space is not quite as large as the headliner edge. The wire diameter is fine but the "tap" end doesn't quite fit with just pushing.
Has anyone else used this location for their wire and, if so, what tips are there for feeding the wire?
Also, my '15 GTS only has one connector under the dome lights (circled yellow). Any thoughts on whether this "other" connector will work?
Has anyone else used this location for their wire and, if so, what tips are there for feeding the wire?
Also, my '15 GTS only has one connector under the dome lights (circled yellow). Any thoughts on whether this "other" connector will work?
Thanks.
C
#54
#56
Well I decided not to wait for the 20inch. Was motivated this morning. Did the install without the blend mount. Used the suction cups for a high install.
I am no DIY guy and this was easy thanks to the great thread.
Thanks to all.
I am no DIY guy and this was easy thanks to the great thread.
Thanks to all.
Last edited by cpbmd; 09-23-2018 at 05:45 PM.
#58
#59
install parts
I just ordered the V1 window mount here on ebay:
https://www.ebay.com/itm/1-x-NEW-Per...72.m2749.l2649
Also ordered the Uniden R3 one:
https://www.ebay.com/itm/Permanent-W...72.m2749.l2648
And some clear 3M VHB tape; same as the black stuff supposedly on these mounts:
And...the 15" hardwire cable:
https://www.ebay.com/itm/1-x-NEW-Per...72.m2749.l2649
Also ordered the Uniden R3 one:
https://www.ebay.com/itm/Permanent-W...72.m2749.l2648
And some clear 3M VHB tape; same as the black stuff supposedly on these mounts:
And...the 15" hardwire cable:
The following users liked this post:
Fdvigna (10-29-2022)