Notices
991 GT3, GT3RS, GT2RS and 911R 2012-2019
Sponsored by:
Sponsored by:

OFFICIAL 991.2 GT3 RELEASE *Confirmed 500HP 4.0 & Manual option*

Thread Tools
 
Search this Thread
 
Old 03-07-2017, 12:01 PM
  #361  
Alan Smithee
Rennlist Member
 
Alan Smithee's Avatar
 
Join Date: Feb 2004
Location: Los Angeles
Posts: 5,270
Received 259 Likes on 137 Posts
Default

^ Rear camera is mandatory in the US per DOT starting in 2018. No PCM delete here.
Old 03-07-2017, 12:03 PM
  #362  
Chris3963
Rennlist Member
 
Chris3963's Avatar
 
Join Date: Aug 2014
Location: Antipodes
Posts: 2,639
Received 1,084 Likes on 384 Posts
Default

My config done at the dealer this morning. Was 1st on list. Confirmed Delivery July.

Color White
Black leather interior, seats in leather / Alcantara in comb. with decorative stitching in Red
Leather interior with decorative stitching in Red
Bi-xenon incl. Porsche Dynamic Light System (PDLS)
reversing camera
Windscreen with gray colored strip
Porsche Doppelkupplung (PDK)
Lift system for the front axle
Sport Chrono
90L fuel tank
Porsche Car Connect incl. Alarm Vehicle Tracking System Plus
Platinum wheels
Club Sport packet
6-point safety harness passenger side
Cruise control
Automatically dimming interior and exterior mirrors with integrated rain sensor
GT3 Sports steering wheel with 12-hour mark in Red
Sport Seats (folding carbon buckets)
Smoker's package
Carpets
Seat belts in Guards Red
Interior package in carbon
Door thresholds in carbon with type logo
Old 03-07-2017, 12:04 PM
  #363  
Drifting
Rennlist Member
 
Drifting's Avatar
 
Join Date: Oct 2013
Location: Rocky Mountains
Posts: 5,040
Received 1,198 Likes on 638 Posts
Default

Originally Posted by Nizer
So four years on the transmission debacle is finally sorted, cosmetics and downforce are upgraded, and the motor has finally undergone proper motorsports development and appears sorted. All appears back on track in Porsche GT-land. Now if they'd just strip the interior, shed 200 or so pounds, and give us a 5-lug option it'd be nirvana.

First mod on this car after dropping the heavy side cans has to be a lightweight flywheel.
Agree completely on first paragraph, but not the second.

Read APs full technical description in the Pistonheads article. The .2 GT3 specifically doesn't have a lightweight flywheel to protect the engine as this engine will be abused a lot more than a 911R. He said that if you add a lightweight flywheel to this engine, it will make the engine less reliable.
Old 03-07-2017, 12:09 PM
  #364  
Nick
Rennlist Member
 
Nick's Avatar
 
Join Date: Jun 2001
Location: La Jolla
Posts: 3,667
Received 146 Likes on 72 Posts
Default

Originally Posted by Jimmy-D
What color?? This will be tough. I see no yellow stitching or striping which becomes a factor with PCCBs.

Going to screw me up
Most dealers paint the calipers for around $500.
Old 03-07-2017, 12:11 PM
  #365  
Nick
Rennlist Member
 
Nick's Avatar
 
Join Date: Jun 2001
Location: La Jolla
Posts: 3,667
Received 146 Likes on 72 Posts
Default

Originally Posted by Dougr743
so manual will not start till september. funny my dealer told me that.
Actually, allocations (build dates) for US begin in September for PDK and one month later for manual.
Old 03-07-2017, 12:11 PM
  #366  
strettyend
Racer
 
strettyend's Avatar
 
Join Date: Feb 2016
Posts: 343
Likes: 0
Received 42 Likes on 22 Posts
Default

Originally Posted by Chris3963
My config done at the dealer this morning. Was 1st on list. Confirmed Delivery July.

Color White
Black leather interior, seats in leather / Alcantara in comb. with decorative stitching in Red
Leather interior with decorative stitching in Red
Bi-xenon incl. Porsche Dynamic Light System (PDLS)
reversing camera
Windscreen with gray colored strip
Porsche Doppelkupplung (PDK)
Lift system for the front axle
Sport Chrono
90L fuel tank
Porsche Car Connect incl. Alarm Vehicle Tracking System Plus
Platinum wheels
Club Sport packet
6-point safety harness passenger side
Cruise control
Automatically dimming interior and exterior mirrors with integrated rain sensor
GT3 Sports steering wheel with 12-hour mark in Red
Sport Seats (folding carbon buckets)
Smoker's package
Carpets
Seat belts in Guards Red
Interior package in carbon
Door thresholds in carbon with type logo
Congrats!
Old 03-07-2017, 12:12 PM
  #367  
Seranad
Instructor
 
Seranad's Avatar
 
Join Date: Oct 2011
Posts: 245
Received 0 Likes on 0 Posts
Default

Originally Posted by Kobalt
Well spotted - the plot thickens

Originally Posted by Chris3963
My config done at the dealer this morning. Was 1st on list. Confirmed Delivery July.

Color White
Black leather interior, seats in leather / Alcantara in comb. with decorative stitching in Red
Leather interior with decorative stitching in Red
Bi-xenon incl. Porsche Dynamic Light System (PDLS)
reversing camera
Windscreen with gray colored strip
Porsche Doppelkupplung (PDK)
Lift system for the front axle
Sport Chrono
90L fuel tank
Porsche Car Connect incl. Alarm Vehicle Tracking System Plus
Platinum wheels
Club Sport packet
6-point safety harness passenger side
Cruise control
Automatically dimming interior and exterior mirrors with integrated rain sensor
GT3 Sports steering wheel with 12-hour mark in Red
Sport Seats (folding carbon buckets)
Smoker's package
Carpets
Seat belts in Guards Red
Interior package in carbon
Door thresholds in carbon with type logo
great build, I am still struggling with mine :-)
but delivery end of July sounds great
Old 03-07-2017, 12:15 PM
  #368  
Jamie140
Nordschleife Master
 
Jamie140's Avatar
 
Join Date: Sep 2003
Location: Barrie/Marco Island, fl.
Posts: 6,266
Received 724 Likes on 340 Posts
Default

Originally Posted by Nick
Actually, allocations (build dates) for US begin in September for PDK and one month later for manual.
Merry Christmas!!
Old 03-07-2017, 12:15 PM
  #369  
STG
Race Director
Thread Starter
 
STG's Avatar
 
Join Date: Nov 2014
Location: FL
Posts: 13,800
Likes: 0
Received 193 Likes on 137 Posts
Default

"CHALK" in USA

Name:  photo858.jpg
Views: 1156
Size:  104.7 KB
Old 03-07-2017, 12:17 PM
  #370  
mad_max
Racer
 
mad_max's Avatar
 
Join Date: Apr 2016
Location: Tampa, FL
Posts: 280
Received 22 Likes on 18 Posts
Default

Originally Posted by STG
Where did you find this link. The configurator is not available on the Porsche USA website.
Old 03-07-2017, 12:18 PM
  #371  
STG
Race Director
Thread Starter
 
STG's Avatar
 
Join Date: Nov 2014
Location: FL
Posts: 13,800
Likes: 0
Received 193 Likes on 137 Posts
Default

Originally Posted by mad_max
Where did you find this link. The configurator is not available on the Porsche USA website.

Name:  photo164.jpg
Views: 1154
Size:  237.0 KB
Enjoy and don't ask too many questions .. Do you ask the price someone paid for when giving you a gift?
Old 03-07-2017, 12:19 PM
  #372  
zedcat
Rennlist Member
 
zedcat's Avatar
 
Join Date: Apr 2008
Posts: 2,310
Received 358 Likes on 258 Posts
Default

Originally Posted by Nizer
"But the main point on this engine is the cylinder head. We changed the valvetrain to almost a race car or motorcycle engine so we do not have any longer the hydraulic valve adjusters, we threw them out. So you cannot adjust the play in the valves, which is not necessary because it will never change because of the materials involved here. We ran one engine on the dyno for 300,000km and it did not change, not one a half a tenth and we did it several times. So the owners do not have to worry that they have to go to the dealer every 10,000km to adjust the shims.

"The advantage is you need a lower oil pressure because the hydraulic valve lifters, they need to be fed, they need pressure and oil lines through them ... this is a part that calls for a lot of oil pressure and to create oil pressure you need a pump. Mostly you need the oil only for the bearings but they don't need the pressure.

"We have new finger followers with a stiff connection to the valve without any hydraulic adjustment between, which makes it lighter, which makes it a lot lighter to turn, which makes the forces pressure forces between the cam lobe and the finger follower much less - it is about 20 per cent less - so the material is less stressed without the pressure and it just frees up horsepower by deleting it. These are elements which called for a different head design, which called for a different geometry - you can't just go to a gen one engine and take them out! It is a new head and it is worth at least six, seven, eight, nine horsepower, something like that just with less friction."


http://www.pistonheads.com/news/ph-g...-new-gt3/35880
I did see that after my first post. Still very interested to learn more on the valve train. Dyno test of one engine doesn't prove reliability to me. Wonder if there is anything in the maintenance schedule at all. The web site describes the use of shims so not sure that squares with the statement of no adjustment ever.

The MT is not an overriding draw for me. My 2015 has been rock solid so far (except the thermostat replacement) but the prospect of improved long term engine reliability is of interest.
Old 03-07-2017, 12:20 PM
  #373  
Oaktown
Advanced
 
Oaktown's Avatar
 
Join Date: Sep 2015
Location: California
Posts: 68
Received 2 Likes on 1 Post
Default


Andreas evolving like the GT3. What a pro. Took care of all the previous gen GT cars, and created quite a stir for yet another fine niche.

Us city boys will need a rear lift now too with those rear diffusers -
Attached Images  
Old 03-07-2017, 12:26 PM
  #374  
JDHertz11
Race Car
 
JDHertz11's Avatar
 
Join Date: Nov 2007
Location: Miamah, La Florida
Posts: 4,694
Likes: 0
Received 67 Likes on 26 Posts
Default

Not so sure about the Blue and red... and yellow and silver wheels...



Old 03-07-2017, 12:32 PM
  #375  
mad_max
Racer
 
mad_max's Avatar
 
Join Date: Apr 2016
Location: Tampa, FL
Posts: 280
Received 22 Likes on 18 Posts
Default

Originally Posted by STG
Attachment 1142221
Enjoy and don't ask too many questions .. Do you ask the price someone paid for when giving you a gift?
LOL. I'll shut up. But separate question. Is the leather covered dashboard packaged into the full leather?


Quick Reply: OFFICIAL 991.2 GT3 RELEASE *Confirmed 500HP 4.0 & Manual option*



All times are GMT -3. The time now is 11:36 PM.