OFFICIAL 991.2 GT3 RELEASE *Confirmed 500HP 4.0 & Manual option*
#347
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
^^^Other than to get Manual why?? The .2RS will be even sicker. I just prefer Manual and find the RS to be just too much with the wing and less prettier than the GT3. But make no bones about it - the .2Rs will exceed every ones' expectation.
#348
Race Car
#351
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
#352
Race Car
#353
Race Director
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Last edited by STG; 03-07-2017 at 12:03 PM.
#354
Rennlist Member
Join Date: Feb 2006
Location: Wishing I Was At The Track
Posts: 13,607
Received 1,841 Likes
on
955 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
"The advantage is you need a lower oil pressure because the hydraulic valve lifters, they need to be fed, they need pressure and oil lines through them ... this is a part that calls for a lot of oil pressure and to create oil pressure you need a pump. Mostly you need the oil only for the bearings but they don't need the pressure.
"We have new finger followers with a stiff connection to the valve without any hydraulic adjustment between, which makes it lighter, which makes it a lot lighter to turn, which makes the forces pressure forces between the cam lobe and the finger follower much less - it is about 20 per cent less - so the material is less stressed without the pressure and it just frees up horsepower by deleting it. These are elements which called for a different head design, which called for a different geometry - you can't just go to a gen one engine and take them out! It is a new head and it is worth at least six, seven, eight, nine horsepower, something like that just with less friction."
http://www.pistonheads.com/news/ph-g...-new-gt3/35880
#356
Race Car
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Man reverse camera and car play would be nice.
#357
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Just came back from my dealer and signed the contract for my 991.2 GT3. Now i just have to wait.
Two things I didn't find on the configurator and they will confirm tomorrow, the painted Roll Bar in either White or Red and the Manual wasn't in the configurator. So they took a note on it and to be confirmed with Porsche tomorrow.
Two things I didn't find on the configurator and they will confirm tomorrow, the painted Roll Bar in either White or Red and the Manual wasn't in the configurator. So they took a note on it and to be confirmed with Porsche tomorrow.
#358
Race Director
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by poofyo101
is it no manuals until september production or you cannot begin ordering manuals until september
What I heard:
PDK available from the get go, start of production CW28 (second week July)
Manual available CW36 (first week September) ‘at the earliest’
Cars will be model year 2018
#359
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
where the hell is the radio delete?