911R's rear diffuser
#151
This link convinced me to order one, delivery next week.... They've had no issues with the cooling fins being covered. https://motoiq.com/project-porsche-991-gt3-rs-improving-the-aero-with-a-911r-rear-diffuser/3/
#153
#154
Three Wheelin'
I bought one - I know I'm faster everywhere at the track because my wallet is $500 lighter.
There's no difference in access for oil change, etc. between this and the stock engine cover. Easy to deal with either.
There's no difference in access for oil change, etc. between this and the stock engine cover. Easy to deal with either.
The following users liked this post:
bulldog_YYC (07-12-2020)
#155
#156
That's a much better story for selling it--most of the time when you see someone selling an optional part the assumption is they were not happy with it.
Looks like it would be easy to do the swap yourself as well for any 991.1 GT3?
Looks like it would be easy to do the swap yourself as well for any 991.1 GT3?
#157
#159
Instructor
I love mine and you need to be careful with speed bumps. In rainy days you can really tell the difference in the vortices.
Last edited by astolfor; 09-18-2018 at 11:26 PM.
#161
very late reply, but hope it helps someone !
I do know that the 991.2 GT3RS Diffuser fits onto the 991.1 GT3RS. but the only the outer 6 screw holes line up 100%.
Even though it has no 'cut out' fir the cooling fins and the centre 4 fixing holes do not align correctly, it seems very secure.
my opinion is the 6 screws ( 3 either side ) is more the capable to hold the diffuser safely in place.
Ive done trackdays and general driving around without and over-heating or the diffuser flying off!
By the way, my guess is the 991R Diffuser has the same fittings as the 991.1 GT3 and the 991.2 GT3/RS is the same except for the centre 4 holes placement.
hope this helps from someone that actually has the part fitted to their car.
I do know that the 991.2 GT3RS Diffuser fits onto the 991.1 GT3RS. but the only the outer 6 screw holes line up 100%.
Even though it has no 'cut out' fir the cooling fins and the centre 4 fixing holes do not align correctly, it seems very secure.
my opinion is the 6 screws ( 3 either side ) is more the capable to hold the diffuser safely in place.
Ive done trackdays and general driving around without and over-heating or the diffuser flying off!
By the way, my guess is the 991R Diffuser has the same fittings as the 991.1 GT3 and the 991.2 GT3/RS is the same except for the centre 4 holes placement.
hope this helps from someone that actually has the part fitted to their car.
The following users liked this post:
JM DiFabio (10-18-2022)
#162
Instructor
I know this is an old thread but has anyone been able to use this diffuser on the standard 991.1..based on this thread it's a direct volt on for the gt3s but wanted to see if it's been successfully put on a standard 3.8
#164
Nordschleife Master
I've been on a couple of web site and can not tell what one is what. What is the difference with these 2 part #'s? What one should fit a 991.1 GT3?
#165
Any update on long term usability without the cutout and temps/PDK performance?
Perspectives on drivability/speedbumps etc?
Thank you in advance
Perspectives on drivability/speedbumps etc?
Thank you in advance