991 GT2RS
#4728
Rennlist Member
From what I gather during PCA Tech Tactics in Dec 2017, it was confirmed by PCNA Tech. rep. that you cannot retrofit OEM rollbar to US GT2RS since PAG took out the OEM rollbar mounting plate from US cars.
#4729
Rennlist Member
Join Date: Feb 2006
Location: Wishing I Was At The Track
Posts: 13,648
Received 1,867 Likes
on
967 Posts
Majority will have WP and they'll be plenty of non-black cars out there.
Rollbar requires front mounting plates to be installed, which could be fabricated and welded in. Not the ideal solution, but it could be done. Sourcing the rollbar is more of a challenge than the lack of mounting plates. Strikes as a wide open opportunity for someone with Ti welding and fab skills.
Rollbar requires front mounting plates to be installed, which could be fabricated and welded in. Not the ideal solution, but it could be done. Sourcing the rollbar is more of a challenge than the lack of mounting plates. Strikes as a wide open opportunity for someone with Ti welding and fab skills.
#4730
Rennlist Member
#4731
#4732
Good choice... Black or GT Silver WP
#4733
#4735
Instructor
Join Date: Apr 2015
Location: Scandinavia
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
#4738
Why do you say not for long ? I think that now it s WP or PTS for those who configure their car now.
But when we have closed the configuration of the car 1 month ago, I don t think they will change it and say : you have to choose the WP or the PTS....? ( because my car is PTS with WP too... )
Best regards
But when we have closed the configuration of the car 1 month ago, I don t think they will change it and say : you have to choose the WP or the PTS....? ( because my car is PTS with WP too... )
Best regards