Car Trailers for GT3
07-02-2015 | 01:56 PM
#31
Drifting
Joined: Jul 2009
Posts: 3,278
Likes: 25
From: Black Sheep Racing World HQ
(Voice of Hans & Franz): Hear me now and believe me later... you look like a girly-man if you don't have a 3/4 ton diesel pulling a 24' (preferably an even longer gooseneck) TPD enclosed trailer.
07-02-2015 | 02:46 PM
#33
Rennlist Member
Joined: Aug 2007
Posts: 4,727
Likes: 110
From: Canada
I see you are using also an SUV. No instability in the highways?
I have towed over 30,000 miles with the Cayenne,numerous very long trips..Toronto to Phoenix multiple times right across the windy high plains, through storms, the lot. Often with a heavier car on the back. No stability problems. Obviously I have a trailer controller and set up the bias properly.
I have towed over 30,000 miles with the Cayenne,numerous very long trips..Toronto to Phoenix multiple times right across the windy high plains, through storms, the lot. Often with a heavier car on the back. No stability problems. Obviously I have a trailer controller and set up the bias properly.
07-02-2015 | 04:42 PM
#35
Rennlist Member
Joined: Dec 2001
Posts: 3,168
Likes: 437
07-02-2015 | 05:13 PM
#36
Rennlist Member
Joined: Apr 2007
Posts: 759
Likes: 7
From: Toledo Ohio
My setup. 2009 Pace American Shadow GT 28'. I got tired of hoofing my fat **** out of the window and falling out the side door. I installed a Harbor Freight 12,000 winch with the remote control two weeks ago when I went to VIR. Works perfectly.
07-02-2015 | 09:37 PM
#38
Rennlist Member
Joined: Jul 2007
Posts: 3,143
Likes: 165
" if you can't see my mirrors I can't see you "
07-02-2015 | 11:05 PM
#40
Thread Starter
Drifting
Joined: Dec 2010
Posts: 2,193
Likes: 59
From: Dallas
07-02-2015 | 11:06 PM
#41
Thread Starter
Drifting
Joined: Dec 2010
Posts: 2,193
Likes: 59
From: Dallas
I like your setup. I wish I have a truck.
07-03-2015 | 02:00 AM
#42
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Apr 2002
Posts: 43,564
Likes: 5,897
From: san francisco
07-03-2015 | 10:32 AM
#43
Rennlist Member
Joined: Feb 2009
Posts: 3,555
Likes: 302
From: Portland, OR
Montoya,
Can you send a link for the tie straps you used? What length are they? Double J-Hooks?
I also have a 24 foot Vortech and was going to splurge on MACs wheel nets but I have Rennline tie-down anchors on the car, so a bit of a waste.
I am hoping to use the same tie-downs for the cup and street GT3.
thxbuff2001, how about you? What tie-down straps / lengths did you use? They look like they are locking hooks rather than double-j's, but hard to tell in the pic.
Thanks!
Can you send a link for the tie straps you used? What length are they? Double J-Hooks?
I also have a 24 foot Vortech and was going to splurge on MACs wheel nets but I have Rennline tie-down anchors on the car, so a bit of a waste.
I am hoping to use the same tie-downs for the cup and street GT3.
thxbuff2001, how about you? What tie-down straps / lengths did you use? They look like they are locking hooks rather than double-j's, but hard to tell in the pic.
Thanks!
Tie downs
http://www.macscustomtiedowns.com/pr...-2x12/TieDowns
Wheel straps
http://www.macscustomtiedowns.com/pr...-2x40/TieDowns
Wheel strap covers
http://www.macscustomtiedowns.com/pr...-2x20/TieDowns
This is what I have- the synthetic rope is money!:
http://www.warn.com/truck/winches/VR8000-s_winch.shtml
You will want the wireless remote:
http://www.warn.com/truck/accessorie...ol_90287.shtml
07-03-2015 | 02:06 PM
#45
Rennlist Member
Joined: Dec 2009
Posts: 2,855
Likes: 54
From: Bakersfield, CA