Ordering sport bucket seats from Europe
#16
Nordschleife Master
#17
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Go ahead and source a current European ROW gt3 seat for your upcoming MY2015 991 gt3. Take your chances and see if it works.
By the way, has anyone made a gt2 'sport bucket seat' made to work (airbags/sensors) on a 991 to date? And wouldn't it make more sense to wait for the 991 gt3 RS 'sport bucket seat' to be released in the US? It will be safer in your 991, DOT legal, height & tilt adjustable and probably not that more expensive than your grey-market, non-adjustable & antiquated gt2 seat!
Saludos,
Eduardo
Carmel
.
#18
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Porsche probably only changed the wiring connectors. Why not just look at both wiring harnesses and and make a connector to swap in the 997 seats with deustch connectors. I bet it would work just fine.
#19
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Go ahead and source a current European ROW gt3 seat for your upcoming MY2015 991 gt3. Take your chances and see if it works.
By the way, has anyone made a gt2 'sport bucket seat' made to work (airbags/sensors) on a 991 to date? And wouldn't it make more sense to wait for the 991 gt3 RS 'sport bucket seat' to be released in the US? It will be safer in your 991, DOT legal, height & tilt adjustable and probably not that more expensive than your grey-market, non-adjustable & antiquated gt2 seat!
Me too.
#20
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
#21
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
"I also took the opportunity to ask Ric Knab at Suncoast about the compatibility of the 'gt2' type seats for the US specs 991 and 981's"
Question #2 - RE: Fact that PCNA has not homologated any type of 'sport bucket seat' for the MY2014 991 gt3 or any US spec 991 or 981 for that matter!
A) Will the existing 997 era gt2 sport bucket seat you sell (airbags/folding type) plug into a 991 or 981 Porsche and work 100%? Airbags & passenger seat sensors work?
B) If answer to #1 is 'no', will the current gt2 seat available currently in Europe/ROW be able to be imported by YOU, sold to us in the USA, & plug into US spec MY2013/MY2014 991, 981 or 991 gt3 and WORK (airbags, passenger seat sensors, and no fault codes to light up the instruments panel)????? If the answer to #2 is also 'no', can you give us an explanation as to why not? Is it the electrical wires on the 991 that are different? Is it BUS interface? What is the reason?
Answer from Knab: "We tested the 997 GT2 bucket seat into a 991, the wiring was incredibly different. Once we saw that, we decided not to investigate any further. I don't have specifics on this, but we made a wise decision to walk away, and not attempt to modify any wiring. We didn't check the mounting points to see if they were compatible. So again, my professional opinion is that it's not possible to install the 997 seats in a 991/981. I'm sure people will try, maybe it could be done with wiring modifications or PIWIS. I can't help with that sort of retrofit. I haven't heard anything official on the new sport bucket seats, but if Porsche won't ship a car to the USA with the seats installed, they probably won't allow us to order them. At the moment there are no retrofit seats, so I can't get a plug-and-play seat at the moment anyway. Building the seat, piece-by-piece wouldn't be possible for us, that's not something I can help with. If someone is interested in these seats, all we can do is wait and see if Porsche releases them in the future. Keep in mind, the 997 model was launched in 2004/2005, the GT2 seat didn't appear until 2008. So that was three years into production before the retrofit was available, and three years until it was an option for US models."
We have already touched on this result (Sunset trying to fit a 997 gt2 seat on a 991) on a different thread started by mdrums - 'Major Fail -No Sport Bucket Seat Option'. So where does that leaves us, PCNA's US 991/981 customers? Will Gert at Carnewal be allowed by Porsche to ship the current Euro 991/981 'gt2 type' seat to US and will that current Euro 991/981 'gt2 type' seat plug into a US 991, 981 or 991 gt3 & work correctly? Or did Porsche designed the electronics of the US spec 991/981 in such a way that the current Euro 991/981 'gt2 type' seat will NOT work and will NEVER work with it? Indeed, no other 'bucket' seat will fully work until they decide to issue a US approved 991/981 'gt2 type' seat for this market? This is what I am afraid of and I think that is a topic for further discussion on this forum!"
https://rennlist.com/forums/991/7492...d-991-gt3.html
Saludos,
Eduardo
#22
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![crying](https://rennlist.com/forums/graemlins/bigcry.gif)
I'm glad to hear this.
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
Suncoast made an attempt and then backed off.
#23
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Cheaper, easier, safer..
Get the seats with removable halo for street.
https://rennlist.com/forums/showthre...ferrerid=59610
Get the seats with removable halo for street.
https://rennlist.com/forums/showthre...ferrerid=59610
#24
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Cheaper, easier, safer..
Get the seats with removable halo for street.
https://rennlist.com/forums/showthre...ferrerid=59610
Get the seats with removable halo for street.
https://rennlist.com/forums/showthre...ferrerid=59610
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#25
Technical Guru
Rennlist Member
Rennlist Member
#26
Rennlist Member
Join Date: Jan 2013
Location: West Vancouver and San Francisco
Posts: 4,266
Received 1,238 Likes
on
607 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Cheaper, easier, safer..
Get the seats with removable halo for street.
https://rennlist.com/forums/showthre...ferrerid=59610
Get the seats with removable halo for street.
https://rennlist.com/forums/showthre...ferrerid=59610
#27
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The Porsche FMVSS certifications only apply to the entire vehicle. You can sell any car seat that you want in the USA. The DOT/NHTSA has no power to restrict their importation unless there is a documented safety problem. And even then, it is nearly impossible to get them to do anything (i've tried...) And for what its worth, I've never heard of PAG being unwilling to sell a ROW part in the USA.
After discussing the lack of a 'sport bucket seat' option in the US 991/981 for more than one year, I don't doubt now that you can import that gt2 'sport bucket seat' from Carnewal. I also don't think that gt2 'sport bucket seat' imported from Belgium would be different from the one that Suncoast, or your local dealer, could also import from PAG. The issue now is whether that gt2 Porsche 'sport bucket seat', regardless your source of importation, would operate as designed (airbags would deploy) in a US spec 991/981. If it could be done, don't you think some enterprising American 991/981 owner would have already accomplished it and let us know! The 991's started reaching our shores in early 2012 and they are a common sight at DE all across our country. Necessity is the mother of invention. If someone had found a way to make either 997-era gt2's or ROW 991/981-era gt2's fully operable (airbags deploy in case of accident, etc) in a US spec 991/981, you don't think someone would be advertising the fact that you can go around the regulations by buying a particularly imported Porsche gt2 'sport bucket seat' and using their DIY installation instructions to make it work as designed? I would think so.
Saludos,
Eduardo
Carmel
* Suncoast still imports authentic Porsche gt2 seats...supposedly for 997/987customers. When PAG gets a NEW order for a gt2 from a dealer such as Suncoast, what gt2 seat do they send out to them? Given that gt2 seats are currently still in production for ROW 991/981 today, do you think PAG in Germany has a warehouse full of old 997-era 'gt2' seats just waiting to be ordered by someone like Suncoast? Or are they going to send a current gt2 seat if that new order comes in! Whether they switch the wiring harness or plugs for these orders we don't yet know for sure. The Suncoast gt2 tested by Ric Knab on a 991 were probably 997-era gt2's that Suncoast had already in stock. I don't know what kind of plugs or wirings come on more recent gt2 seats that have arrived at US dealers in more recent times. But that would be interesting to find out.
.
.
#28
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Even if the connections were the same or someone made a connector to work, my dealer said that they would not program the airbags even if I provided the code because of liability issues since these seats are not currently approved for North America. It's as simple as that.
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
#29
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Even if the connections were the same or someone made a connector to work, my dealer said that they would not program the airbags even if I provided the code because of liability issues since these seats are not currently approved for North America. It's as simple as that.
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
But we know that there is always some computer wizard out there that can operate a PIWIS diagnostic tool OBD2 OBDII...whatever...and get around that particular dealer liability concern by doing it in the privacy of his garage. But I don't want to be the driver & passenger on that vehicle in case of a severe accident? Did they, or did they not, deployed...that is the question! And what will your insurance company say?
Saludos,
Eduardo
Carmel
PS Conekilr: Did you finally get to order a PTS 991 gt3? If so, in what PTS color?
.
#30
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)