The OFFICIAL Speedster pictures thread
10-19-2022, 11:15 PM
#691
Three Wheelin'
10-23-2022, 02:11 PM
#692
Advanced
I just noticed the wire attached to my one flap on the back for the top is loose and the flap keeps falling down when trying to raise or lower the top. Any ideas on a quick fix?
10-24-2022, 01:47 PM
#693
Congratulations!
I find your comments to be surprising. Does your car have an exhaust or is it stock.
I found the Speedster to be very quiet especially with the roof down. Yesterday I took my Speedster for a drive back to back with my 992 Touring and I find the touring is perfect straight out of the box and I really had to add an exhaust to the speedster.
The CGT would have to trounce it in the sound department??
When I bought my speedster I felt that the only step above would be a CGT, however the gap is fairly significant including the price delta.
I find your comments to be surprising. Does your car have an exhaust or is it stock.
I found the Speedster to be very quiet especially with the roof down. Yesterday I took my Speedster for a drive back to back with my 992 Touring and I find the touring is perfect straight out of the box and I really had to add an exhaust to the speedster.
The CGT would have to trounce it in the sound department??
When I bought my speedster I felt that the only step above would be a CGT, however the gap is fairly significant including the price delta.
The CGT should never have a louder exhaust and outside the car it sounds MUCH better than when driving even with the top off. There's no need for unwanted attention in my view so Ive actually never changed any Porsche exhaust. I find the speedster with the sport button on and flaps open is near perfection! Its rough, metallic, and has that locomotive smoothness to it all in one package in these GT3 motors. The CGT has those same attributes with the flaps open and top down. Lots of character, I suggest finding a windy B road with big trees hanging overhead. I couldn't imagine needed more sound.
The following users liked this post:
Condor Man (10-28-2022)
10-24-2022, 01:50 PM
#694
I do really like this look, planing on just taking front wrap off. The issue I'm having is would this have been done at the factory? Was there a section to order factory decals on Speedsters like some of the new cars? Just taking about the numbers and Porsche logos.
Last edited by cgt04115; 10-24-2022 at 02:09 PM.
10-25-2022, 12:49 AM
#695
Drifting
Yes, the number and the Porsche logo were all available from the factory when you specced the car out. A simple request that everybody could have requested back in the days.
The following users liked this post:
Condor Man (10-28-2022)
The following 3 users liked this post by STALKER99:
The following users liked this post:
Condor Man (10-28-2022)
10-26-2022, 08:20 AM
#699
Rennlist Member
Stock
The following users liked this post:
cgt04115 (10-26-2022)
10-26-2022, 06:44 PM
#700
Advanced
Top
Speedster owners - do you know how to pull the slack out of the line on the top back flaps? I have one side that stays up and the cord is tight and one that is loose and won't stay up. You can work around it close the back but would prefer it worked.
10-28-2022, 12:13 AM
#701
Three Wheelin'
It is certainly louder.
The only other option would be to remove the inside of the OPF filter to give it a cleaner more pure sound.
The following users liked this post:
PopsRacer (10-28-2022)
10-28-2022, 12:14 AM
#702
Three Wheelin'
10-28-2022, 12:15 AM
#703
Three Wheelin'
10-28-2022, 12:18 AM
#704
Three Wheelin'
10-28-2022, 04:32 PM
#705
Three Wheelin'
I have considered having the ‘inners’ of the OPF filters removed but a little hesitant from a dealer/warranty perspective.