When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Anyone install one yet and happy with the results? I've had sharkwerks bypass on my last two 2 gt3's and was happy with the results. Would like something easy to install. Thanks
Anyone install one yet and happy with the results? I've had sharkwerks bypass on my last two 2 gt3's and was happy with the results. Would like something easy to install. Thanks
GMG center pipe is what I run on my .1 gt3rs, much better sound than SW
We installed a McKenna exhaust last week and will not get the car back from Protective Film Solutions until Thursday. The short before and after sound clips the tech sent me aren't really illustrating why I chose this center bypass. The design shares a bit of BBI and GMG. You can order with or without a logo imprinted. Ergo chair not included.
I'll post more when I get a chance to go for a canyon drive.
We're offering our Centre Bypass exclusively produced from high grade Titanium, after all it seems an awful shame to remove the factory Titanium centre silencer and replace with anything less exotic.
Here installed on a 991.2 GT3 RS
JCR Titanium Centre Bypass & Titanium Bolt-On Tips
We have a thread running containing further information
We installed a McKenna exhaust last week and will not get the car back from Protective Film Solutions until Thursday. The short before and after sound clips the tech sent me aren't really illustrating why I chose this center bypass. The design shares a bit of BBI and GMG. You can order with or without a logo imprinted. Ergo chair not included.
I'll post more when I get a chance to go for a canyon drive.
Sorry, dumb question. This is the first time I've heard of the "McKenna exhaust". I assume this is from the McKenna dealership? If so, I will ask them about it since I bought my car there. I need to take it there in November for a windshield replacement and an oil change/yearly service.
We're offering our Centre Bypass exclusively produced from high grade Titanium, after all it seems an awful shame to remove the factory Titanium centre silencer and replace with anything less exotic.
Here installed on a 991.2 GT3 RS
JCR Titanium Centre Bypass & Titanium Bolt-On Tips
We have a thread running containing further information
I have a 991.2GT3 PDK and 981 Spyder which i have an interest in upgrading..I checked out your website and Instagram account yesterday which was very impressive..I filled the form on the website with my contact details however i'm unsure on whether you received it or not.I'm in the UK and intend fitting a rear bypass on my GT3 plus the extended gearshift paddles..
Please let me know if message was not received so i can re-post via my e-mail account..
Do you still do the GT3 rear bypass in Inconel as well as Titanium..? You also mention only using 321SS which is another option i'm considering..
Sorry, dumb question. This is the first time I've heard of the "McKenna exhaust". I assume this is from the McKenna dealership? If so, I will ask them about it since I bought my car there. I need to take it there in November for a windshield replacement and an oil change/yearly service.
The Mckenna center bypass is built by sleepers speed shop in costa mesa, you can see their "ee" logo on the gusset under the two pipes.
I have a 991.2GT3 PDK and 981 Spyder which i have an interest in upgrading..I checked out your website and Instagram account yesterday which was very impressive..I filled the form on the website with my contact details however i'm unsure on whether you received it or not.I'm in the UK and intend fitting a rear bypass on my GT3 plus the extended gearshift paddles..
Please let me know if message was not received so i can re-post via my e-mail account..
Do you still do the GT3 rear bypass in Inconel as well as Titanium..? You also mention only using 321SS which is another option i'm considering..
Hey,
Apolgies it seems the contact message was not received so if you could reach out sending to our email address that would be much appreciated and I’ll be happy to help!
We’re focussed on the titanium bypass now, happy to explain further via email