968 car bra's
#1
Burning Brakes
Thread Starter
Join Date: Mar 2007
Location: Nor Cal
Posts: 1,177
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have yet to see a pic of a 968 wearing one. I'm thinking of picking one up from Pelican and I would like to know how it connects to the car. If any of you have a 964 with a bra you know how much of a pain the bra is.
I'm hoping that the 968 is not the same.
![banghead](https://rennlist.com/forums/graemlins/banghead.gif)
I'm hoping that the 968 is not the same.
#3
Burning Brakes
Thread Starter
Join Date: Mar 2007
Location: Nor Cal
Posts: 1,177
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Oh I know about that. But thanks for the concern. The vette owners that I mentioned earlier had the 968 outside for a month with the bra on during 2 rainstorms.
They really don't care what happens to that car. Its sad, really.
![manual](https://rennlist.com/forums/graemlins/rtfm.gif)
#4
Super Moderator
Needs More Cowbell
Lifetime Rennlist
Member
Needs More Cowbell
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
You also have to be careful of sand/dirt/grit getting behind the bra (between the bra and painted surface), especially if the bra starts "slapping' at speed.
FWIW, I would never put one on my cars.....either go 'commando' and get a respray when needed or go with a '3M' film bra and replace as needed.
FWIW, I would never put one on my cars.....either go 'commando' and get a respray when needed or go with a '3M' film bra and replace as needed.
#5
Rennlist Member
Join Date: Oct 2003
Location: Shawsheen River Basin
Posts: 1,697
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I agree with Lewis. the 3m bra would be a better option. I have the OEM bra, but I only use it when I'm driving hundreds of miles.
Here is a picture of it on my car - in this photo I dont have the additional piece on the hood.
http://www.mcbride-family.com/968/he...s/image084.jpg
The OEM bra connects with plactic clips that wrap around the wheel well and tabs that slide in the engine bay.
Here is a picture of it on my car - in this photo I dont have the additional piece on the hood.
http://www.mcbride-family.com/968/he...s/image084.jpg
The OEM bra connects with plactic clips that wrap around the wheel well and tabs that slide in the engine bay.
Last edited by Shamus; 06-06-2007 at 07:46 AM.
#6
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here's a picture with bra. Not my taste and not my car, but gives you an idea to make up your own mind. Also you just gotta love the "Gateway" inpired seat covers.
#7
Burning Brakes
Thread Starter
Join Date: Mar 2007
Location: Nor Cal
Posts: 1,177
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by ltc
You also have to be careful of sand/dirt/grit getting behind the bra (between the bra and painted surface), especially if the bra starts "slapping' at speed.
FWIW, I would never put one on my cars.....either go 'commando' and get a respray when needed or go with a '3M' film bra and replace as needed.
FWIW, I would never put one on my cars.....either go 'commando' and get a respray when needed or go with a '3M' film bra and replace as needed.
Trending Topics
#8
Rennlist Member
Join Date: Oct 2003
Location: Shawsheen River Basin
Posts: 1,697
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I would describe it as an adhesive film as opposed to "glue on plastic" stuff, but yes.
I have it on the pepper.
http://multimedia.mmm.com/mws/mediaw...ttt6_XdpTTTT6-
I have it on the pepper.
http://multimedia.mmm.com/mws/mediaw...ttt6_XdpTTTT6-
#9
Super Moderator
Needs More Cowbell
Lifetime Rennlist
Member
Needs More Cowbell
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
If you are looking for another alternative, there is also a 'spray on' clear bra....think of it like a clearcoat. Sprayed on 1 mil at a time, about 5-6 layers, then baked on in a booth....again, just like clearcoat.
I had it applied to my daily driver (Ford Escape Hybrid) about a year ago and so far I've been happy with it.
The 3M film can be applied and removed with no paint issues. There are many different brands/installers, but they are all basically derivatives of the 3M film product.
I had it applied to my daily driver (Ford Escape Hybrid) about a year ago and so far I've been happy with it.
The 3M film can be applied and removed with no paint issues. There are many different brands/installers, but they are all basically derivatives of the 3M film product.
#12
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The factory bra is fine, you just have to be careful about wet and grit. I have used car bras on and off for 20 years and have never had the catastrophes or paint damage that some people describe. However, I only use them for long highway trips and pull them whenever wet. I have dried one more than once on a shower rod in a hotel room.
What I don't like about the factory bra is how it attaches in the wheel wells. It is hard to get the bendable metal tabs to hold the material taughtly enough. Often when I stop and check the bra the lower tab in the wheel well has come undone and is flapping slightly.
The 968 bra is two piece and it can be hard to close the hood with the bra in place. You really have to slam/drop it hard. Nice thing about the two piece is that you can opt to just use the hood portion - I think it looks kind of cool.
What I don't like about the factory bra is how it attaches in the wheel wells. It is hard to get the bendable metal tabs to hold the material taughtly enough. Often when I stop and check the bra the lower tab in the wheel well has come undone and is flapping slightly.
The 968 bra is two piece and it can be hard to close the hood with the bra in place. You really have to slam/drop it hard. Nice thing about the two piece is that you can opt to just use the hood portion - I think it looks kind of cool.