No spark
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
No spark
So I was having the LSD and shift linkage repaired and now the old girl has decided not to start....appears maybe the EZ769 ignition module is bad and of course it's no longer an available part.....anyone else come across this and have a solution?
The following users liked this post:
heliolps2 (07-22-2023)
The following users liked this post:
heliolps2 (07-22-2023)
#6
Addict
Rennlist Member
Rennlist Member
Thread Starter
Thanks John, I remember following that thread......my issue is it won't start as in no spark.....we have a donor unit coming to help trouble shoot.....ill keep thread updated....
#7
Rennlist Member
The turbo control unit should actually be called a safety relay. It enables spark and fuel when it gets a signal from the flywheel hall effect sensor.
If you need one for troubleshooting I have one.
If you need one for troubleshooting I have one.
Trending Topics
#9
Former Vendor
I wish I could, but we don't repair those units.
There used to be a company in Germany that did so, but last time I asked them they told me they were too busy for that kind of work.
There used to be a company in Germany that did so, but last time I asked them they told me they were too busy for that kind of work.
#14
Addict
Rennlist Member
Rennlist Member
Thread Starter
All that was being worked on was the LSD and shift linkage so not really anything on the electrics side.....however for the last year it's had intermittent RPM issues with the gauge going dead arbitrarily and bouncing all over. We had replaced the sending unit last year and it seemed to help for a bit but still had erratic readings at times.....
I saw in an old thread that Cobalt had a couple of spares for a 3.3.......hoping he might still have them
I saw in an old thread that Cobalt had a couple of spares for a 3.3.......hoping he might still have them