My Turbo 3.6 is in for a full respray.
10-24-2013, 08:28 AM
#63
Three Wheelin'
Thread Starter
Weekend, work will be resumed on saturday where the brakes will be bleed and the rims go back on. The engine bonnet installed with wing and the rubber strip and "turbo 3.6" decal. rear lights need to be installed.
New oil filter, new oil and install PSS10's. I also told them to paint the under side protection bar under the front bumper which was scrapped whilst parking the car. Its slow, but turning out alright.
10-27-2013, 05:19 PM
#66
Three Wheelin'
Thread Starter
Funny that, I have oem tips "Black" I am going to cut the ugly b&b and weld those this week. I have PSS10 bilstein coilovers which should arrive this thursday.
10-28-2013, 11:27 AM
#67
Three Wheelin'
Thread Starter
Update,
Car is moving along nicely. Side skirts need to be installed. and front and rear wipers along with rear turbo 3.6 badge.
It seems that my POS B&B muffler is cracked on the right side, I have contacted Cargraphic and have placed an order for their sports muffler with oval tips which look identical to stock. I no longer need to weld the Black OEM 3.3 tips on my B&B.
Happy about that,
Car is moving along nicely. Side skirts need to be installed. and front and rear wipers along with rear turbo 3.6 badge.
It seems that my POS B&B muffler is cracked on the right side, I have contacted Cargraphic and have placed an order for their sports muffler with oval tips which look identical to stock. I no longer need to weld the Black OEM 3.3 tips on my B&B.
Happy about that,
10-29-2013, 12:31 PM
#68
Three Wheelin'
Thread Starter
Optimistic to pickitup on thursday, last minute stuff ignition timing, install sunroof, install front bumper and rear Turbo 3.6 badge.
Had the front under protection bar coated for rust protection, as I previously met ends with the pavement.
Car is going along nicely, it will be back for PSS10 install next week and then off to service centre for RS Spec alignment. For now I am awaiting my Exhaust from cargraphic.
Had the front under protection bar coated for rust protection, as I previously met ends with the pavement.
Car is going along nicely, it will be back for PSS10 install next week and then off to service centre for RS Spec alignment. For now I am awaiting my Exhaust from cargraphic.
10-31-2013, 06:35 AM
#70
Three Wheelin'
Thread Starter
Not surprised 
,
Bilstein PSS10s arrived today, work will resume on Saturday for PSS10 installation and RS spec ride height.
a relay for the fuel pump was changed, so no hot start problems hopefully.
Detailing, car looks very pretty.
,Bilstein PSS10s arrived today, work will resume on Saturday for PSS10 installation and RS spec ride height.
a relay for the fuel pump was changed, so no hot start problems hopefully.
Detailing, car looks very pretty.
10-31-2013, 12:02 PM
#72
Instructor
Join Date: Mar 2013
Location: Tulsa, OK
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Can't wait to hear what you think if the pSS10. I want to hear your impression as I'm thinking about the same upgrade. Car is looking good.
10-31-2013, 01:57 PM
#73
Thank You
Rennlist Member
Rennlist Member
Join Date: Nov 2006
Location: Texas - it's a whole nuther country
Posts: 2,278
Likes: 0
Received 0 Likes
on
0 Posts
[/QUOTE]Perfect! Love the PSS10, getting a set installed on my 996 Turbo right now as well. Looks like everything is coming together. Congrats!