tim911pcar

does anyone know where I could find splitters for the front bumper??A factory c2 turbo bumper Thanks Or does anyone have some for sale?? Im in the states

eyue

Splitters had been discussed a lot in the forum, do some searching, it's easy to find ! BTW, I got my from Los Angeles !

Metal Guru

Try Carnewal http://www.carnewal-europe.com/main.htm

RichiRich

It says it's no longer available and has done for a while now: http://www.carnewal-europe.com/cpx_p64016.htm

a thompson

That's to bad, got mine last year from Carnewal. The fit was great, it even had porsche part numbers on it.

Andy

olly964T

If we can find someone still selling them we could try a group buy. I`m after one.

here is the original splitter thread if you want to do a bit of reading.

https://rennlist.com/forums/964-turb...-splitter.html

Szpet

Is there any chance that you still have the Porsche Part number of it?

Thanks

OttoB

I got mine from rennspd.com and below is a link as to all the different options they offer...

http://www.rennspd.com/Products.asp?...ID=10&catID=12

a thompson

Szpet, I got this from when we were talking about this last year and I think it is correct. needless to say for our cars it's the 965 part number. If you read the old post that olly nicely posted a link to you will have more info on chin splitters than you will need.
hope this helps
Andy
Oh just to be clear 965 505 151 01 and 965 505 152 01 are the part numbers on the splitters from carnewal.
Here is the info from last year I cut and pasted
I have a brand-new -still not fitted- original set (which i bought from a well-known fellow owner a few years ago). Part no's for these splitters are 965.505.151.01.01C (left hand side) and 965.505.152.01.01C (right hand side), however they also show 964.505.201.80 (left-hand side) and 964.505.202.80 (right hand side

hchan911

http://gettydesign.com/911_misc.html#rsrsplitters

tim911pcar

Thanks everyone I am going to look at some links.. I now there harder to find now...

tim911pcar

I looked at reen speed thats what I want I think the gts would be the best because of how its mounted U know it will get hit..Problem is they said they were for 964 not 965 Ill call tomorow thanks again Friend of mine had a set of carbon fiber ones on his turbo speedster. one flew off on the highway.

OttoB

As long as you know that a lot of it has to do with the workmanship of installation, you won't be surprised. I bought mine from rennspd and they were a handful to install - I ordered the least expensive 2 piece set on the second page, and although they look good now, it was beyond my ability to DIY to make them look that way.

fat cab

this is where mine came from Tim,
http://www.rennspd.com/P_Detail.asp?PID=436&Task=STD

ralt

I got mine some years ago from MA SHAW in lax for $110.00. Dont know if they are still there. $129.00 from Getty Design for fibre glass seems about right.