Jubi arrived but... sth went wrong
#16
Instructor
Looks brand new! was this a Garage Current car?
On the airbag light, no need to get the Hammer $$$, just get T-OBD (Tore On Board Diagnostic tool) here
http://www.bergvillfx.com/index.php/...agnostics.html
Here is my thread on removing airbag light
https://rennlist.com/forums/964-foru...act-break.html
You need to download 'Scantool' software, I believe it is available from Bergvillfx site.
Also do a search here, many forum members have posted about it.
You have to have this tool especially at $130, indispensable for any 964 owner. Just a note, Scantool has a limitation for C4 so you may need the Hammer which is $1260.
On the airbag light, no need to get the Hammer $$$, just get T-OBD (Tore On Board Diagnostic tool) here
http://www.bergvillfx.com/index.php/...agnostics.html
Here is my thread on removing airbag light
https://rennlist.com/forums/964-foru...act-break.html
You need to download 'Scantool' software, I believe it is available from Bergvillfx site.
Also do a search here, many forum members have posted about it.
You have to have this tool especially at $130, indispensable for any 964 owner. Just a note, Scantool has a limitation for C4 so you may need the Hammer which is $1260.
Last edited by jorijori; 09-26-2014 at 01:34 PM.
#17
Instructor
Thread Starter
Looks brand new! was is a Garage Current car? On the airbag light, no need to get the Hammer $$$, just get T-OBD (Tore On Board Diagnostic tool) here http://www.bergvillfx.com/index.php/...agnostics.html Here is my thread on removing airbag light https://rennlist.com/forums/964-foru...act-break.html You need to download 'Scantool' software, I believe it is available from Bergvillfx site. Also do a search here, many forum members have posted about it. You have to have this tool especially at $130, indispensable for any 964 owner. Just a note, Scantool has a limitation for C4 so you may need the Hammer which is $1260.
#18
Instructor
On my car 93 C2 trip, if I remove the battery, the air bag light will go on. The only way to remove it is by clearing the error code via a diagnostic tool & the cheapest way is T-OBD.
I tried many things before finally figuring it out. Yes you can drive it with the airbag light on, but it's annoying.
I tried many things before finally figuring it out. Yes you can drive it with the airbag light on, but it's annoying.