Center of attention: 964 centerlock test
10-20-2012 | 08:16 PM
#17
Racer
Joined: Jun 2001
Posts: 495
Likes: 0
From: Greensboro NC
Our wheels are available in 7-15" wide widths in 1/2" increments. any offset is available. 8" fronts and 10" rears will fit cleanly under a narrow body 964. but the only wheel I had on hand when I stopped by was the front 18x10" wheel off of our DZ project car Mjølner.
Last edited by pete77930; 05-20-2013 at 10:46 PM.
10-21-2012 | 09:06 AM
#19
Advanced
Joined: Nov 2009
Posts: 66
Likes: 0
RSR/917 Wheels sourcing
In need of RSR/917 18" x 12 (335/30x18) for rear and 18" x 10 (245/40x18) for the front. Working on the off-set. My adapter is 25mm thick, guess need to change to to match different pin size as well! What's on offer?
Last edited by The Old Dutch; 10-22-2012 at 04:31 AM.
10-21-2012 | 01:26 PM
#20
Racer
Joined: Jun 2001
Posts: 495
Likes: 0
From: Greensboro NC
10-21-2012 | 01:33 PM
#21
Racer
Joined: Jun 2001
Posts: 495
Likes: 0
From: Greensboro NC
03-05-2019 | 11:29 PM
#22
Advanced
Joined: Sep 2018
Posts: 58
Likes: 1
Our wheels are available in 7-15" wide widths in 1/2" increments. any offset is available. 8" fronts and 10" rears will fit cleanly under a narrow body 964. but the only wheel I had on hand when I stopped by was the front 18x10" wheel off of our DZ project car Mjølner.
can I get these for my 997.1 Turbo ?
03-06-2019 | 05:01 PM
#23
Burning Brakes
Joined: Jul 2015
Posts: 1,234
Likes: 46
From: Whittier
Once again I find I am the "odd man out." I don't really care for those. They look too utilitarian to me. Plus I think any weight savings in the wheel would be lost with the hub adopter. Not to mention the added complexity of changing a wheel/tire.
But I am just one guy and no one cares what I think.
But I am just one guy and no one cares what I think.
