taillight renovation
#1
Track Day
Thread Starter
Join Date: Jun 2012
Location: Hong Kong
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I just renovate my tail light for my Porsche C2.
Taillight was severely crack in 2 positions and was faded .
Attachment 659774
The price of new one was over 400 euros. I decided to renovate first using STICKER FILM. This product is popular now to custom the car lights from original color to black color. Of course I chose the shiny red color.
The use is easy :
1) Precut the film to leave around 2 cm clearance all around the light
2) Spray abundantly with water.
3) Remove the protective film on the sticker side. (I start my light from the left side, but I think it will be easier from the center)
Attachment 659775
4) Slowly apply the sticker using the tool to remove the air bubbles as much as possible
5) Cut with a blade the 2 cm film around the light
6) When the whole sticker is in position, pressing from center to side of light to remove the remaining bubbles. I use a airdryer to help.
7) When no more bubbles stick the edges with the airdryer and your finger
8) Remove the top protective film on the shinny part
The result is amazing. The smaller crack is nearly invisible.
Attachment 659776
I really recommend this method for faded light or the one with small cracks. I will seal it and protect for water going inside. Next week end I will do my right and left light.
Taillight was severely crack in 2 positions and was faded .
Attachment 659774
The price of new one was over 400 euros. I decided to renovate first using STICKER FILM. This product is popular now to custom the car lights from original color to black color. Of course I chose the shiny red color.
The use is easy :
1) Precut the film to leave around 2 cm clearance all around the light
2) Spray abundantly with water.
3) Remove the protective film on the sticker side. (I start my light from the left side, but I think it will be easier from the center)
Attachment 659775
4) Slowly apply the sticker using the tool to remove the air bubbles as much as possible
5) Cut with a blade the 2 cm film around the light
6) When the whole sticker is in position, pressing from center to side of light to remove the remaining bubbles. I use a airdryer to help.
7) When no more bubbles stick the edges with the airdryer and your finger
8) Remove the top protective film on the shinny part
The result is amazing. The smaller crack is nearly invisible.
Attachment 659776
I really recommend this method for faded light or the one with small cracks. I will seal it and protect for water going inside. Next week end I will do my right and left light.
Last edited by bo11; 10-10-2013 at 09:12 AM.
#3
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks!
Looks good! I have now ordered some film and will try this as well! Seems similar tothe specific film kit that is available for the 964 but much cheaper...
Looks good! I have now ordered some film and will try this as well! Seems similar tothe specific film kit that is available for the 964 but much cheaper...
![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
#4
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Welcome to the 964 forum bo11!
First post and already a DIY contribution to the forum. Very nice.
964 faded tail lights really detract for an otherwise beautiful car.
I've had vinyl tint on my car for the past couple of years and it's still looks perfect. This is a great mod.
First post and already a DIY contribution to the forum. Very nice.
964 faded tail lights really detract for an otherwise beautiful car.
I've had vinyl tint on my car for the past couple of years and it's still looks perfect. This is a great mod.
#5
Instructor
Join Date: May 2012
Location: Epsom, England
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Looking good. Nice post too!
Jack, let me know how you get on with the indicators. I used Gus's kit, I think the indicators are too red, I tried green paint but you couldn't see them in daylight.
Need a solution before MOT in Oct
Jack, let me know how you get on with the indicators. I used Gus's kit, I think the indicators are too red, I tried green paint but you couldn't see them in daylight.
Need a solution before MOT in Oct
#6
Track Day
Thread Starter
Join Date: Jun 2012
Location: Hong Kong
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi,
Yes i read that the film is guaranty by the manufacturer for 3 years minimum.
I dont know the price of the available kit on the market. But if some are interested i can propose you to send you the kit for 2 indicator and taillight + the tool to apply it for 30 euros.
Bo11
Yes i read that the film is guaranty by the manufacturer for 3 years minimum.
I dont know the price of the available kit on the market. But if some are interested i can propose you to send you the kit for 2 indicator and taillight + the tool to apply it for 30 euros.
Bo11
#7
Instructor
Join Date: Apr 2010
Location: Telford, PA
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I bought the kit and it made a huge difference on my tail lights. However, my car failed Pennsylvania inspection. They said that at least one reverse light needed to be white. I cut off the film over the reverse lights and passed inspection.
Trending Topics
#8
Instructor
Join Date: Mar 2009
Location: Hertfordshire, UK
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Looks like a great idea especially with the crazy prices for new lights. Can anyone who did this a while ago recommend a film supplier knowing the film has passed the test of time?
#10