black ice

No affiliation, just spotted these - they'd look cool on a 964; but only 9s in back
http://tampa.craigslist.org/hil/pts/1986389771.html

dave

hawk911

ETs are wrong too, without shims/spacers

V

Not neccesarily, remember the cup cars ran 9.5x18 ET47 in the back. I think they will fit bolt on but I would be more concerned with the fronts rubbing on the inside as they sit 5mm closer to the inside than the OEM speedlines...

GeorgeK

Viggo,
The Cup 17" rims were ET 68, then sold with a 21mm spacer that brings the ET down to 47,
Doesn't change much in the end though

hawk911

lemme just keep telling myself the ETs are wrong, ok?

V

Hi George ,

I was actually thinking of the 18" cup series speedlines that were used on the cup cars in the racing series. If I remember correctly, I think those rear speedlines were 9,5x18 ET47. Anyways, just to show that the offsets on these RUF wheels should work.

carnumber6

These are wheels that fit perfectly with those offsets.. Ruf did a good job making sure everything clears at those offsets and wheel widths .. LOl you got to love a 56.7 offset

J81 JKR

heres my 964 with RUFs fitted....